Re: Trying to configure X
Now I see why exec of XF86_SVGA failed....the file does not exist in
/usr/bin/X11.
This appears to be some sort of an install error....I was never asked to
download that file and put it there, this should have happened automatically
I would think when I choose to do a 'simple' install of an X Window system.
So is there some error in the install system or did I do something wrong?
Ron
----- Original Message -----
From: "Ron Stordahl" <ron.stordahl@mailhub.digikey.com>
To: "Ron Rademaker" <ron@wep.tudelft.nl>; "Ron Stordahl"
<ron.stordahl@mailhub.digikey.com>
Cc: "Debian User List" <debian-user@lists.debian.org>
Sent: Friday, May 19, 2000 6:53 PM
Subject: Re: Trying to configure X
> I believe I have made all the correct selections using xf86config, but
after
> that when I try startx here is what happens:
>
> X: exec of /usr/bin/X11XF86_SVGA failed
> _X11TransSocketUNIXConnect: Can't connect: errno = 111
> giving up
> xinit: Connection refused (errno 111): unable to connect to X server
> xinit: No such process (errno 3): Server error.
>
> I am stuck at that point. Any ideas???
>
> Ron
>
>
> ----- Original Message -----
> From: "Ron Rademaker" <ron@wep.tudelft.nl>
> To: "Ron Stordahl" <ron.stordahl@mailhub.digikey.com>
> Cc: "Debian User List" <debian-user@lists.debian.org>
> Sent: Friday, May 19, 2000 6:46 PM
> Subject: Re: Trying to configure X
>
>
> > /dev/psaux
> >
> > That's the mouse device you want (/dev/mouse might be a symlink to this
> > check woth ls -l /dev/mouse).
> >
> > The server for the card should definately be XF86_SVGA, you should be a
> > ware that there are diferences between the X server ad the driver for
your
> > videocard!
> >
> > Ron Rademaker
> >
> > On Fri, 19 May 2000, Ron Stordahl wrote:
> >
> > > Questions arising during xf86config:
> > >
> > > Mouse--I have a 3 button PS/2 mouse so I select "4 PS/2 Mouse". Since
> it
> > > has 3 buttons I choose not to emulate 3 buttons. So good so far, but
> now it
> > > asks for the full device name. I have no idea. It suggests
/dev/tty00
> > > which seems unlikely. Just pressing enter will default to /dev/mouse.
> This
> > > seems reasonable, but my recollection is that a response to this
> question
> > > previously said I need to enter /dev/psaux. I have looked through
the
> > > install doc and it does not answer this question.
> > >
> > > Selection of the card. I have a Jaton Video-67pro PCI which is not
> listed,
> > > however the chip on the card says Trident 3DImage975 which is in the
> table
> > > showing the driver is the "3dimage975". Looks good, so I select that
> which
> > > is number 651.
> > >
> > > Now I am at the point which I must determine which server to run. My
> > > choices are:
> > >
> > > 1 XF86_Mono
> > > 2 XF86_VGA16
> > > 3 XF86-SVGA
> > > 4 The accelerated servers.....
> > > 5 "Choose the server from the card definition, XF86_SVGA"
> > >
> > > None of these seem to be good choices, since mine appears to be
> "3dimage975"
> > > I would pick XF86_SVGA, which appears in the list after the card
> definitions
> > > for many many cards, but since for my card it explicitly noted
> "3dimage975"
> > > it would not seem to be correct to pick XF86_SVGA. I should note that
> in a
> > > failed configuration prior to this e-mail I did just that, and it
didn't
> > > work.
> > >
> > > So what do to?
> > >
> > > Ron
> > >
> > >
> > >
> > >
> > > --
> > > Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org
<
> /dev/null
> > >
> >
> >
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org <
/dev/null
>
>
Reply to: