RE: Xproblem - modelines?
check your settings for the moniter vert & horiz frequencies
-----Original Message-----
From: Olaf Meeuwissen [mailto:olaf@epkowa.co.jp]
Sent: 25 April 2000 02:03
To: Mats Ström
Cc: debian-user@lists.debian.org
Subject: Re: Xproblem - modelines?
Mats Ström <d99msr@efd.lth.se> writes:
> On 25 Apr 2000, Olaf Meeuwissen wrote:
>
> > Mats Ström <d99msr@efd.lth.se> writes:
> >
> > > I am trying to get X working on S3 trio3D card. My XFree86 is
> > > version 3.3.6 which supports the trio3D.
> >
> > Same here, with a Nanao/EIZO FlexScan L360 monitor. So far I've only
> > been able to get XF86_VGA16 to run :-(
>
> If you have XFree86 version 3.3.6 or 4.0 you can get it to work. The 3.3.6
> has support for trio3d in the SVGA server, and the 4.0 has support in the
> S3V server. Its all in the manuals on www.xfree86.org. =)
I know it should work and that's what's buggering me! When I try with
the SVGA server all I draw is a blank. The screen turns black and
after a few seconds the monitor seems to go into power saving mode. I
kill the server (Ctrl-Alt-Backspace) and the monitor comes back to
live (the screen gets a bit blacker, that's how I can tell) and then
gives me the console again.
For reference:
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14 i586 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
[ ... chomp ... ]
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "jp106"
(**) XKB: layout: "jp"
(**) Mouse: type: PS/2, device: /dev/psaux, resolution: 100
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "S3 Trio3D"
(**) SVGA: Monitor ID: "FlexScan"
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic:un
scaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Spee
do,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/l
ib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/font
s/kaname"
(--) SVGA: PCI: S3 Trio3D rev 1, Memory @ 0xf4000000
(--) SVGA: S3V: Trio3D rev 1, Linear FB @ 0xf4000000
(--) SVGA: Detected S3 Trio3D
(--) SVGA: using driver for chipset "s3_virge"
(--) SVGA: videoram: 4096k
(--) SVGA: Ramdac speed: 230 MHz
(--) SVGA: Detected current MCLK value of 75.170 MHz
(--) SVGA: chipset: s3_virge
(--) SVGA: videoram: 4096k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 230.000 MHz
(**) SVGA: Mode "640x480": mode clock = 36.000
(--) SVGA: Virtual resolution set to 640x480
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: s3_virge: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext,
TE/NonTE polytext)
(--) SVGA: XAA: Using 5 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
xinit: connection to X server lost.
waiting for X server to shut down
--
Olaf Meeuwissen Epson Kowa Corporation, Research and Development
--
Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org <
/dev/null
Reply to: