STILL can't install!!!

[dkphoto <dkphoto@cyber-wire.com>]

Well I spoke too soon! I finally got dselect going and actually
installing files, only to come back an hour later and find the machine
frozen solid. If anyone can help me determine what went wrong I would
appreciate it.

Background info: I have a Mac IIci with 48megs of RAM and a 700meg hard
drive partitioned so: 100megs root, 550megs usr, 50 megs swap.

I picked a basic (I think 405 meg) profile for installation and set
dselect to work.

Here is what was on the monitor when I found the system frozen:

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­?

Unpacking libc6-develop (from.../ libc6-dev_2.0.7.19981211-6.deb)
scsi : aborting command due to timeout : pid 45082, scsi0, channel 0, id
1, lun 0, write(6) 04 2b 3d 02 00
scsi0 : aborting command
scsi0 : destination target 1, lun 0
     command = Write (6) 04 2b 32 02 00
NCR380 : coroutine is running.
STATUS_REG : 00
BASR : 0a, ATN
ICR : 02, ASSERTATN
MODE : 100
scsi0 : REQ not asserted, phase unknown.
NCR5380 core release = 7
Base Addr : 0x00000 io_port : 50f10000+RQ : 19.
NCR5380 : coroutine is running
scsi0 : no currently connected command
scsi0 : issue_queue
scsi0 : destination target 1, lun 0
     command = 10 (0x 0a) 04 2b 3d 02 00
SCSI disk error : host 0 channel 0 id 1 lun 0 return code = 50000
scsi disk I/O error : develop 08:14, sector 56926, absolute sector 273213
scsi0 : wee - reselected after selection complete!

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­-

The fist thought that occurs to me is: does dselect know enough to put
files on the usr partition, or did it freeze trying to stuff 400+ megs
onto a 100 meg root partition? How does dselect know which files to put
on which partition? Or does it know?

Any help would be greatly appreciated. Coming up next: attempt number
NINE to install this EASY to install system!!!

David Kachel