ppp troubles with slirp
I'm using the version of ppp that comes with slink, 2.3.5-2, and I log
in using a chat script to start up slirp at my ISP. (They make
available login scripts -- for windows and macintosh users -- to start
slirp, but they don't have any direct ppp login for reasons that are a
mystery to me.) The ISP is on SunOS.
I can dial in fine with minicom and use it as a terminal, but when I
use slirp and ppp the ppp connection seems to freeze up at times and
then start working again. Even something as simple as a telnet
session gets stuck at times. I thought maybe there isn't an 8 bit
clean link, and I tried invoking slirp as
slirp "asyncmap ffffffff" "escape ff"
Unfortunately, this didn't seem to help much, if at all. I've written
to the sysadmin, but I haven't gotten any useful information. Anyone
have any ideas about how to solve this? How to diagnose it? What more
information should I provide?
Thanks,
--Miguel
Here's my /etc/ppp/peers/provider:
# This file was generated by pppconfig. You can edit the following lines
# but please do not delete lines or the change the comments or you will
# confuse pppconfig.
noauth #pppconfig_noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" #pppconfig_connect
debug #pppconfig_debug
/dev/ttyS1 #pppconfig_dev
115200 #pppconfig_speed
defaultroute #pppconfig_route
noipdefault #pppconfig_ipdefault
user mwooding #pppconfig_user
# End of pppconfig controlled lines. You can add lines below here without
# confusing pppconfig.
And /etc/chatscripts/provider:
ABORT BUSY
ABORT "NO CARRIER"
ABORT VOICE
ABORT "NO DIALTONE"
ABORT "NO ANSWER"
"" ATZ
OK ATDT5940014
CONNECT ''
ogin: \d\qmwooding
ssword: **censored**
'' \d\n
']%-\n-]%' 'slirp -P -b 57600 "asyncmap ffffffff" "escape ff"'
"" \d\c
Reply to: