Re: Printing Broken After Upgrade to 2.2.10 Kernel on slink
Brian Servis wrote:
>
> >From the Documentation/Changes file in the 2.2.x kernel tree:
>
> Parallel Ports
> ==============
>
> As of 2.1.33, parallel port support can now by handled by the parport
> driver. Be aware that with Plug-and-Play support turned on, your
> parallel port may no longer be where you expect it; for example, LPT1
> (under DOS) was sometimes /dev/lp1 in Linux, but will probably be
> /dev/lp0 with the new Plug-and-Play driver. If printing breaks with
> the new driver, try checking your lpd configuration. A good source of
> more information is the Documentation/parport.txt file included with
> the kernel.
>
> --
> Brian
> ---------------------------------------------------------------------
> Mechanical Engineering servis@purdue.edu
> Purdue University http://www.ecn.purdue.edu/~servis
> ---------------------------------------------------------------------
Thanks to everyone who replied. I had always wondered why the
parallel ports started at 1--it's good to see that they've made
it consistent with numbering of other device types.
- Kris
Reply to: