Re: faxrunq problems

[Cuno Sonnemans <schuit-sonnemans@tref.nl>]

Allan M. Wind wrote:

> On 1999-07-04 20:20, Cuno Sonnemans wrote:
>
> > I've run faxrunq by hand, but now I have a new problem.
> > I get the following message (my modem is on ttyS0, I've changed sendfax)
> > /dev/ttyS0..............OK
> > /usr/sbin/sendfax: not a class 2/2.0 fax modem.
>
> It states that you serial port 1 is not a fax modem.  What serial port
> is your modem?  (probably serial 3 or 4 when it's an internal).
>
> Then you have to change your device in /etc/mgetty/sendfax.config.
>
> /Allan
> --
> Allan M. Wind                   Phone:  781.938.5272 (home)
> 687 Main Street, 2nd Floor      Fax:    781.938.6641 (fax/modem)
> Woburn, MA 01801                Email:  wind@freewwweb.com (home)

  Hi,

I already changed /etc/mgetty/sendfax.config
Default = ttyS1, I've changed it in ttyS0 (Serial port 2)
So that couldn't be the problem.
faxrunq locates my modem, but say's that it is not
a class 2/2.0 fax modem.
So I think faxrunq has a problem with my type of modem.
Yet it is an fax modem.

----
Cuno Sonnemans            ICQ            22098498
                                         E-mail
schuit-sonnemans@tref.nl