Re: /dev/ttyS2 port not accessible

[Bostjan JERKO <Bostjan.Jerko@socgen.com>]

Acctualy if using default kernel for Debian 2.1 (I think 2.0.36) everything works fine.
I didn't even start using the port since I need to change it's IRQ to 5 I used setserial and
received the message about busy port.
Let me add that I don't have any additional serial cards. This port is used for internal modem.

B.





nate@firetrail.com on 22.12.99 04:31:00 PM
To:	Bostjan JERKO/si/socgen@socgen
cc:	debian-user@lists.debian.org@internet 
Subject:	Re: /dev/ttyS2 port not accessible

On 22 Dec 1999, Bostjan JERKO wrote:

Bostja >When using new (compiled) kernel (e.g. 2.2.15) I receive message for port /dev/ttyS2  - port busy (0 and 1 working properlly). Any
Bostja >ideas what might be the problem ?

is that serial port hard coded on whatever device it's on?  does the
system report the right type, I/O address and IRQ for it?  if not, use the
setserial program to manually set it..

nate

----------------------------------------[mailto:aphro@aphroland.org ]--
   Vice President Network Operations       http://www.firetrail.com/
  Firetrail Internet Services Limited      http://www.aphroland.org/
       Everett, WA 425-348-7336            http://www.linuxpowered.net/
            Powered By:                    http://comedy.aphroland.org/
    Debian 2.1 Linux 2.0.36 SMP            http://yahoo.aphroland.org/
-----------------------------------------[mailto:aphro@netquest.net ]--
7:26am up 124 days, 19:16, 2 users, load average: 0.32, 0.28, 0.31