SCSI difficulty
Trying to boot the rescue floppy (2.0) the kernel tries to load the
Symbios 810A scsi driver and just "loops" with endless
scsi host 0 abort (pid 7) timed out- resetting
scsi bus is being reset for host 0 channel 0
followed by a timed out message.
Had to get a rescue floppy with only adaptec support so it wouldn't
try to load the ncr/symbios driver.
My system only uses the scsi to access a Smart and Friendly CDR 2006
plus, not to boot from scsi.
The kernel 2.3.31 does the same thing, but the kernel 2.2.12 and .13
both work ok. Not sure where to start looking. Thanks!
--
Eddie Seymour, WB4MLE
E-Mail wb4mle@mindspring.com
PGP KEYS D/H 0xB65DC61A RSA 0x935801A9
Reply to: