[slink] X wont start?
Hello all;
I'm trying to setup an old 386 to act as an xterminal, but am having
problems getting X to run. I've attached a log of what 'startx' reports
as it is a little long.
TIA,
Ron
--
=========================
= Ronald Burnett Farrer =
=========================
---------------------------
- "mailto:rbf@farrer.net"; -
- "http://www.farrer.net"; -
---------------------------
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
VGA16: server for 4-bit colour VGA (Patchlevel 0):
ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c,
ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, ncr77c22, ncr77c22e, ati,
sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, oti067, oti077, oti087, oti037c, cl6410, cl6412, cl6420,
cl6440, generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) VGA16: Graphics device ID: "Generic_VGA16"
(**) VGA16: Monitor ID: "HP"
(--) VGA16: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) VGA16: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) VGA16: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) VGA16: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA16: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted.
(--) VGA16: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) VGA16: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) VGA16: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) VGA16: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) VGA16: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) VGA16: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) VGA16: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) VGA16: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) VGA16: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) VGA16: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) VGA16: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) VGA16: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) VGA16: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) VGA16: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) VGA16: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) VGA16: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
Warning: No FontPath specified, using compiled-in default.
(--) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) VGA16: chipset: generic
(--) VGA16: videoram: 256k (using 256k)
(--) VGA16: clocks: 25.18 28.32 37.67 0.00
(--) VGA16: Maximum allowed dot-clock: 90.000 MHz
(**) VGA16: Mode "640x480": mode clock = 25.175, clock used = 25.180
(--) VGA16: There is no mode definition named "800x600"
(--) VGA16: Removing mode "800x600" from list of valid modes.
(**) VGA16: Virtual resolution set to 800x600
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 compiled/xfree86.xkm'
waiting for X server to shut down FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.
.
Reply to: