Re: Problems with SB 64 AWE
You probably need to install and/or configure isapnptools to handle the
plug 'n pray portion. Most likely you'll need to setup some module
parameters as well.
I can email you the configuration settings I'm using for both of the
above, if you'd like. You'll probably have to adapt them somewhat, but
they should give you a pretty close starting point.
On Sun, Oct 17, 1999 at 11:14:54AM +0200, Stephan Hachinger wrote:
> Hello!
>
> I've got a problem setting up a SB Awe 64 under Linux (kernel 2.2.5). I've
> compiled the following support into it:
>
> Sound Blaster (SB, SBPro, SB16, clones) support (CONFIG_SB) [Y/n/?]
> Generic OPL2/OPL3 FM synthesizer support (CONFIG_ADLIB) [Y/n/?]
> /dev/dsp and /dev/audio support (CONFIG_AUDIO) [Y/n/?]
> MIDI interface support (CONFIG_MIDI) [Y/n/?]
> FM synthesizer (YM3812/OPL-3) support (CONFIG_YM3812) [Y/n/?]
> lowlevel sound driver support [Y/n/?]
> AWE32 support (CONFIG_AWE32_SYNTH) [Y/n/?]
>
> (according to the AWE mini howto)
>
> and Plug and Play support.
>
>
> I determined the IRQ etc. by looking up the resources in the WIN 95 device
> manager. But the kernel does not recognize any SB or AWE device.
>
> Perhaps I've determined the resources wrongly, but how to get the resource
> data? It's all ISA plug and pray, and the bios doesn't list much.
>
>
> Maybe someone has already experience with this. Thanks for any help.
>
> Kind Regards,
>
> Stephan Hachiger
Reply to: