New HD, DMA, errors...

[Nicolás Lichtmaier <nick@debian.org>]

 Hi! I've bought a new HD and I'm having troubles with it. It's a Seagate
ST310232A (10 Gb).

 Boot:

PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC AC26200R, ATA DISK drive
hdb: ATAPI CDROM, ATAPI CDROM drive
hdc: ST310232A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC26200R, 5937MB w/512kB Cache, CHS=756/255/63, UDMA
hdc: ST310232A, 9768MB w/512kB Cache, CHS=19846/16/63, UDMA
Partition check:
 hda: hda1 hda2 hda3
 hdc: [PTBL] [1245/255/63] hdc1 hdc2 hdc3

 When I use it I get:

# cat /dev/hdc > /dev/null
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdc: DMA disabled
ide1: reset: success

 Could it be the motherboard (Intel SE440BX-2)? Should I go to the shop and
ask for a refund? Please, if you could help me I would apreciate it...!

 And please CC me because I'm not subscribed to this list. Bye!