Re: X Configuration
startx 2 > error.log did not actually put anything into error.log, it must be writing to stderr. Anyway running it off of a telnet
connection I get the following:
===========================================================================================
gandalf {~} # startx 2
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
VGA2: server for monochrome VGA (Patchlevel 0):
ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c,
ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422,
clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436,
clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215,
clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555,
ncr77c22, ncr77c22e, oti067, oti077, oti087, oti037c, cl6410, cl6412,
cl6420, cl6440, generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MouseMan, device: /dev/ttyS1, baudrate: 1200
(**) Mouse: buttons: 3, Chorded middle button
(**) VGA2: Graphics device ID: "Generic VGA compatible"
(**) VGA2: Monitor ID: "My Monitor"
(--) VGA2: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA2: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) VGA2: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) VGA2: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) VGA2: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) VGA2: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA2: Mode "640x400" needs hsync freq of 43.27 kHz. Deleted.
(--) VGA2: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) VGA2: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA2: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) VGA2: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) VGA2: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) VGA2: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) VGA2: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) VGA2: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) VGA2: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) VGA2: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) VGA2: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) VGA2: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) VGA2: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) VGA2: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) VGA2: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) VGA2: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) VGA2: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) VGA2: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) VGA2: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) VGA2: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) VGA2: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) VGA2: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) VGA2: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) VGA2: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) VGA2: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) VGA2: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA2: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA2: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA2: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA2: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) VGA2: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) VGA2: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) VGA2: PCI: Trident TGUI 9440 rev 227, Memory @ 0xff800000, MMIO @ 0xffaf0000
xf86ReadBios: Failed to open /dev/mem (No such file or directory)
xf86ReadBios: Failed to open /dev/mem (No such file or directory)
(--) Trident chipset version: 0xe3 (TGUI9440AGi)
(--) VGA2: Revision 4.
(--) VGA2: Using Trident programmable clocks
(--) VGA2: chipset: tgui9440agi
(--) VGA2: videoram: 1024k (using 256k)
(--) VGA2: Maximum allowed dot-clock: 90.000 MHz
(**) VGA2: Mode "640x480": mode clock = 25.175
(--) VGA2: There is no mode definition named "800x600"
(--) VGA2: Removing mode "800x600" from list of valid modes.
(**) VGA2: Virtual resolution set to 800x600
Fatal server error:
xf86MapVidMem: failed to open /dev/mem (No such file or directory)
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
===========================================================================================
The last lines are the same on both telnet and console so I assume that the full output is correct. The interesting part is the
/dev/mem not being available, what are the major / minor numbers for this device to create it by hand?
TIA
__ _ Debian GNU User
/ /(_)_ __ _ ___ __ Simon Martin
/ / | | '_ \| | | \ \/ / Project Manager
/ /__| | | | | |_| |> < Isys
\____/_|_| |_|\__,_/_/\_\ mailto: smartin@isys.cl
Reply to: