CS 4232
Hi all,
a week ago or so, I asked about getting CS4232 sound card to work in
Linux. I got some responses and tried without luck.
I dont have /dev/mixer and
cat /proc/sound shows:
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux virtual3d 2.2.1 #1 Tue Aug 3 07:02:40 EST 1999 i586
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: Crystal audio controller (CS4236) (DUPLEX)
Synth devices:
0: Yamaha OPL3
Midi devices:
Timers:
0: System clock
1: Crystal audio controller (CS4236)
Mixers:
0: Crystal audio controller (CS4236)
The modules that I loaded were:
opl3 10264 0 (unused)
cs4232 2264 0 (unused)
uart401 5628 0 [cs4232]
ad1848 14356 0 [cs4232]
sound 55172 0 [opl3 cs4232 uart401 ad1848]
soundlow 240 0 [sound]
and my /etc/modules has:
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a `#', and everything on the line after them are ignored.
# An entry named `auto' will cause the system to start kerneld immediately.
# Kerneld then loads modules on demand. `noauto' disables kerneld completely.
#auto
sound
ad1848
uart401
cs4232 io=0x530 irq=5 dma=1 dma2=0
opl3 io=0x388
What am I still missing?
Thanks, Paulo Henrique
Reply to: