Re: using 6 serial ports

[Michelle Konzack <starone@cybercable.fr>]

Hello,

I had the same problem.
Then I have used for every Serial Port a 
seperatly pair od IO/IRQ and now it works.

But you need a serial card where you have 
enough IO and IRQ's

I can set up on my serial card 32 different 
IO's and all IRQ's.

Webmistress Michelle


At 10:09 10.08.1999 +0200, you wrote
--------> This was the original Message:
MK>
MK>Howdy,
MK>
MK>I added a board with 4 serial ports to my PC.  I can access the
MK>first two serial ports on that board but I do not succeed in connecting
MK>to the other 2 ports.  I added support for more then 4 serial ports
MK>to the kernel and I added some setserial lines to /etc/rc.boot/0setserial
MK>but it still doesn't seem to work.  When I boot Linux I get a message
MK>stating:
MK>
MK>Serial driver version 4.27 with MANY_PORTS SHARE_IRQ enabled
MK>ttyS00 at 0x03f8 (irq = 4) is a 16550A
MK>ttyS01 at 0x02f8 (irq = 3) is a 16550A
MK>ttyS02 at 0x03e8 (irq = 4) is a 16550A
MK>ttyS03 at 0x02e8 (irq = 3) is a 16550A
MK>
MK>Should I do anything special to use the next 2 serial ports? I couldn't
MK>find anything in the serial-HOWTO.
MK>
MK>Thanks in advance,
MK>
MK>Nico
MK>
MK>-- 
MK>--------------------------------------------------------
MK>How do you tell when you run out of invisible ink?
MK>--------------------------------------------------------
MK>Nico De Ranter
MK>Sony Service Center (SUPC-E/NSSE)
MK>Sint Stevens Woluwestraat 55 (Rue de Woluwe-Saint-Etienne)
MK>1130 Brussel (Bruxelles), Belgium, Europe, Earth
MK>Telephone: +32 2 724 86 41 Telefax: +32 2 726 26 86
MK>e-mail: nico.deranter@sonycom.com
MK>
MK>
MK>-- 
MK>Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org <
/dev/null
MK>
MK>
MK>
--------> The Reply begins here: