Printing Broken After Upgrade to 2.2.10 Kernel on slink

[Kristopher Johnson <nosleep@atl.mediaone.net>]

I've upgraded my slink system to a 2.2.10 kernel, by downloading
the kernel sources and using make-kpkg.  I also upgraded to the
new versions of netbase and dhcpcd, and almost everything works
fine.

The only problem I've seen is that I cannot print anymore.  After
attempting a print job, lpq shows me this:

Printer: lp@funkybox  'HP DeskJet'
 Queue: 1 printable job
 Server: pid 17924 active
 Unspooler: pid 17926 active
 Status: cannot open '/dev/lp1' - 'Device not configured',
attempt 2, sleeping 20 at 11:25:08
 Rank   Owner/ID                   Class Job  Files              
Size Time    
active  kjohnson@funkybox+923         A  923 (stdin)           
322 11:24:58

Here is my /etc/printcap file:

# This file was generated by /usr/sbin/magicfilterconfig.
#
lp|hpdj|HP DeskJet:\
	:lp=/dev/lp1:sd=/var/spool/lpd/hpdj:\
	:sh:pw#80:pl#66:px#1440:mx#0:\
	:if=/etc/magicfilter/dj550c-filter:\
	:af=/var/log/lp-acct:lf=/var/log/lp-errs:

Everything worked fine under the 2.0.36 kernel.  /dev/lp1 does
exist, and when I built the 2.2.10 kernel, I included parallel
port support.  Is there something else I need to do?

Thanks,
Kris