Re: ATX power on

[David Todd <dtodd@bbn.com>]

On some boards, it's a matter of connecting two pins on a jumper on the 
motherboard, the case switch performs that connection. That should translate 
to (if these two pins are connected, the power supply is supposed to be on, 
until the drop and then go on again.)

Your BIOS manual might tell the tale, some careful experimentation might as 
well.

Insert standard caveats here. Remember 120V at 15 amps = Crispy Geek.

-- 
Hacksaw = David Charles Todd
BBN Technologies = Hacksaw's Employer
Hacksaw's Opinions != BBN Technologies' Opinions
Linux understands you.