Re: ide-scsi support
On Tue, Jun 15, 1999 at 05:31:09PM +0200, Armin Wegner wrote:
> > <M> SCSI support
> > <M> SCSI disk support
> > <M> SCSI CD-ROM support
> > <M> SCSI generic support
>
> Don't compile them as modules. Compile them into the kernel. I've never
> managed even to compile these modules. I got errors.
I'll try that now, thanks.
[*rustle*]
It doesn't really work: here's some relevant stuff from dmesg:
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTTA-350840, ATA DISK drive
hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdc: CREATIVECD3630E, ATAPI CDROM drive
hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTTA-350840, 8063MB w/467kB Cache, CHS=1027/255/63, UDMA(33)
hdb: 98304kB, 196608 blocks, 512 sector size
hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
Vendor: CREATIVE Model: CD3630E AC101 Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr7 at scsi0, channel 0, id 0, lun 7
Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr8 at scsi0, channel 0, id 1, lun 0
scsi0 : channel 0 target 1 lun 1 request sense failed, performing reset.
SCSI bus is being reset for host 0 channel 0.
scsi : detected 9 SCSI cdroms total.
sr0: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
Uniform CDROM driver Revision: 2.55
sr1: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr3: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr4: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr5: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr6: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr7: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
sr8: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[snip]
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 40k freed
Adding Swap: 130748k swap-space (priority -1)
VFS: Disk change detected on device ide0(3,68)
hdb: hdb4
VFS: Disk change detected on device sr(11,0)
sr0: CD-ROM error: extra data not valid Current error sr0b:00: sense key Illegal Request
Additional sense indicates Illegal mode for this track
command was: Request Sense 00 00 00 10 00
sr0: CD-ROM error: extra data not valid Current error sr0b:00: sense key Illegal Request
Additional sense indicates Illegal mode for this track
command was: Request Sense 00 00 00 10 00
CD-ROM I/O error: dev 0b:00, sector 64
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
VFS: Disk change detected on device sr(11,1)
sr1: CD-ROM error: extra data not valid Current error sr0b:01: sense key Illegal Request
Additional sense indicates Illegal mode for this track
command was: Request Sense 20 00 00 10 00
sr1: CD-ROM error: extra data not valid Current error sr0b:01: sense key Illegal Request
Additional sense indicates Illegal mode for this track
command was: Request Sense 20 00 00 10 00
CD-ROM I/O error: dev 0b:01, sector 64
isofs_read_super: bread failed, dev=0b:01, iso_blknum=16, block=32
[Sorry to put all this in, I didn't want to miss out something
important.]
Any idea what to try now?
--
alisdair mcdiarmid
[it looks like we might have made it we might have made it to the end]
Reply to: