Re: tulip 100mps card; need advice
Hi,
tulip.c:v0.89H 5/23/98 becker@cesdis.gsfc.nasa.gov
eth0: Digital DS21140 Tulip at 0x6100, 00 c0 f0 17 16 0d, IRQ 11.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
eth0: MII transceiver found at MDIO address 1, config 3000 status 7829.
eth0: Advertising 01e1 on PHY 1, previously advertising 01e1.
Works fine at 100MB on an autosensing 10/100 ProCurve hub. The
load is non-existant to moderate, though, but I have heard good
things about this card from other people.
manoj
--
"I believe that Ronald Reagan will someday make this country what it
once was... an arctic wilderness." Steve Martin
Manoj Srivastava <srivasta@debian.org> <http://www.debian.org/%7Esrivasta/>
Key C7261095 fingerprint = CB D9 F4 12 68 07 E4 05 CC 2D 27 12 1D F5 E8 6E
Reply to: