Sound Card Config/Kernel Compile Problems

[Chris Hoover <choover@bellsouth.net>]

I'm having some problems with my yamaha pci sound card that I just installed.  After reading the kernel documentation, I compiled in every thing it said to for the olp3-sa stuff.  However, on the reboot of my system, it looks like some of the sound card parameters are wrong, and I'm not sure what they should be.

Here is what the kernel said:

OSS: OPL3-SA chip not found
Found OPL3-SAx (YMF719)
MSS: I/O port conflict
Sound initialization complete

Alright, the kernel found my card and called thinks it's a YMF719, although it really is a YMF724E-V.  Anyway, how can I tell what the MSS i/o port should be?  Here is some other information I've found while snooping around the proc dir.

/proc/sound:
OSS/Free:3.8s2++-971130
Load type: Driver compiled into kernel
Kernel: Linux debian 2.3.1 #2 Sun May 23 23:48:52 EST 1999 i586
Config options: 0

Installed drivers: 
Type 10: MS Sound System
Type 27: Compaq Deskpro XL
Type 42: OPL3SA2
Type 43: OPL3SA2 MIDI
Type 1: OPL-2/OPL-3 FM
Type 5: Roland MPU-401
Type 26: MPU-401 (UART)
Type 38: Yamaha OPL3-SA
Type 40: OPL3-SA MIDI
Type 36: SoftOSS Virtual Wave Table

Card config: 
(Yamaha OPL3-SA at 0x530 irq 11 drq 0,3)
(OPL3-SA MIDI at 0x330 irq 9 drq 0)
SoftOSS Virtual Wave Table
(OPL3SA2 MIDI at 0x330 irq 9 drq 0)
OPL3SA2 at 0x530 irq 9 drq 0,1
(Compaq Deskpro XL at 0x530 irq 11 drq 3)
(Roland MPU-401 at 0x330 irq 9 drq 0)
(OPL-2/OPL-3 FM at 0x388 drq 0)

Audio devices:

Synth devices:
0: SoftOSS

Midi devices:

Timers:
0: System clock
1: SoftOSS

Mixers:

/proc/pci:
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: VIA Technologies VT 82C585 Apollo VP1/VPX (rev 35).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  Latency=32.  
  Bus  0, device   7, function  0:
    ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 39).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   7, function  1:
    IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  Latency=32.  
      I/O at 0x6000 [0x6001].
  Bus  0, device   8, function  0:
    Multimedia audio controller: Unknown vendor Unknown device (rev 5).
      Vendor id=1073. Device id=4.
      Medium devsel.  IRQ 11.  Master Capable.  Latency=32.  Min Gnt=5.Max Lat=25.
      Non-prefetchable 32 bit memory at 0xe2000000 [0xe2000000].
  Bus  0, device  10, function  0:
    Ethernet controller: 3Com 3C595 100bTX (rev 0).
      Medium devsel.  IRQ 10.  Master Capable.  Latency=248.  Min Gnt=3.Max Lat=8.
      I/O at 0x6200 [0x6201].
  Bus  0, device  11, function  0:
    VGA compatible controller: NVidia Unknown device (rev 4).
      Vendor id=10de. Device id=20.
      Medium devsel.  Fast back-to-back capable.  IRQ 9.  Master Capable.  Latency=32.  Min Gnt=5.Max Lat=1.
      Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000000].
      Prefetchable 32 bit memory at 0xe1000000 [0xe1000008].

Thanks for any help you can provide.

Chris