Re: Help

[Peter Granroth <devnull@granroth.ml.org>]

On Thu, Oct 01, 1998 at 09:51:37AM +0200, Wilson Tuma shared with us the following words of wisdom:
> Hi
> 
>  Which command do I need to to make my system recognized my
> 1. the ip address
> 2. Default Gateway
> 3. broadcast address
> and how do I go about doing that.

these are set in /etc/init.d/network which on my box looks like:

****************************************************************
#! /bin/sh
ifconfig lo 127.0.0.1
route add -net 127.0.0.0
IPADDR=193.10.242.45
NETMASK=255.255.255.0
NETWORK=193.10.242.0
BROADCAST=193.10.242.255
GATEWAY=193.10.242.1
ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
route add -net ${NETWORK}
[ "${GATEWAY}" ] && route add default gw ${GATEWAY} metric 1
***************************************************************
(sans the star lines)

HTH
-- 
------------------------------------------------------------------
+         Peter Granroth         +  Microsoft is NOT the answer  +
+ mailto:devnull@granroth.ml.org +   Microsoft is the question   +
+     http://granroth.ml.org     +       The answer is NO        +
------------------------------------------------------------------