[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Install on CDROMless Laptop



G'day folks,

I've recently acquired myself an oldish 486 laptop, which I'm in the
process of installing Debian on, and I'd like a little advice.

I've successfully managed to complete the base install (which, BTW, I think
was considerably easier than RedHat 4.2 which I have on my desktop system!)
using the 8 Install Floppies. These were taken of an Infomagic CD with
Debian 1.3.1, and so far it has worked pretty flawlessly.

Because I'd like to do a little more than cruise around the file system and
check out the differences b/w redhat and debian, I'd obviously like to
install some of the packages.

I've got myself a PCMCIA ethernet card, and I figure I can share the CD
using NFS on redhat (which I haven't worked out how to do yet, but one
thing at a time...), mount it on the laptop, and install the packages from
there (yes, I did remember to include the NFS module). Here is where I am a
little stuck.

[quote]

Select the Configure Device Drivers menu item and look for devices that are
on your system. Configure those device drivers, and they will be loaded
whenever your system boots. If you want to install the base system via NFS
you must load and configure the driver module for your network card.

There is a menu selection for PCMCIA device drivers, but you need not use
it . Once your system is installed, you can install the pcmcia-cs package.
This detects PCMCIA cards automaticaly, and configures the ones it finds.
It also copes with hot-plugging the cards while the system is booted - they
will all be configured as they are plugged in, and de-confugured when you
unplug them.

[end quote]

The above is from the install.html on the CD, but I can't for the life of
me find the bit to install the PCMCIA drivers from. Maybe I'm blind, but if
it is there, might someone be able to suggest a specific place to look?

Failing that, what is the easiest way to enable the PCMCIA support? Would
it be to find the pcmcia-cs package on the CD, copy that to a floppy, and
install it from a floppy to the laptop, the proceed from there?

Any other suggestions?

Thanks for your help

damon

(PS. It's late, I'm tired, and I suspect I'm rambling a little... if I am,
please forgive me!)


========
Damon Muller (damon@lenore.empire.net.au)
Web Page:   www.sub.net.au/~tr      It's not a sense of humor. It's
ICQ UIN:    2920281                 a sense of irony disguised as one.
PGP Key ID: 0x232C09E1                   - Bruce Sterling


--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble?  e-mail to templin@bucknell.edu .


Reply to: