Re: [SuSE Linux] 8-bit X cut&paste problem

[charles verge <charlesiii@theverge.com>]

I belive
your term is set to 7 bit mode on the remote system
but 8 bit mode may not be surported.

My term is set to 8 bit mode. if you see half way down from the stty
output you see cs8 which is the bit mode cs7 is 7 bit.
see man stty for more info.

[charlesiii@theverge charlesiii]$ stty -a
speed 38400 baud; rows 25; columns 80; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 hupcl -cstopb cread -clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon
-ixoff
-iuclc -ixany -imaxbel
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop
-echoprt
echoctl echoke


http://theverge.com