PPP dial out fails at LCP ConfReq
I have fianlly managed to get a proper chatscript to dial into my ISP (I
think). Now I find that when pppd comes on it always fails at the LCP
ConfReq phase. Here is a snippet from my ppp.log
Oct 3 09:25:08 cabrio chat[1127]: CONNECT
Oct 3 09:25:08 cabrio chat[1127]: -- got it
Oct 3 09:25:08 cabrio chat[1127]: send ()
Oct 3 09:25:08 cabrio chat[1127]: expect (ogin:)
Oct 3 09:25:28 cabrio chat[1127]: 38400^MICG Netcom [PM9:S10]^M
Oct 3 09:25:28 cabrio chat[1127]: ^M
Oct 3 09:25:38 cabrio chat[1127]: login:
Oct 3 09:25:38 cabrio chat[1127]: -- got it
Oct 3 09:25:38 cabrio chat[1127]: send (us,ppp,thaths^M)
Oct 3 09:25:38 cabrio chat[1127]: expect (word:)
Oct 3 09:25:58 cabrio chat[1127]: us,ppp,thaths^M
Oct 3 09:26:08 cabrio chat[1127]: Password:
Oct 3 09:26:08 cabrio chat[1127]: -- got it
Oct 3 09:26:08 cabrio chat[1127]: send (??????)
Oct 3 09:26:08 cabrio chat[1127]: send (\d)
Oct 3 09:26:09 cabrio pppd[1126]: Serial connection established.
Oct 3 09:26:18 cabrio pppd[1126]: Using interface ppp0
Oct 3 09:26:18 cabrio pppd[1126]: Connect: ppp0 <--> /dev/ttyS2
Oct 3 09:26:18 cabrio pppd[1126]: sent [LCP ConfReq id=0x1 <magic
0x7fb8> <pcomp> <accomp>]
Oct 3 09:26:51 cabrio last message repeated 11 times
Oct 3 09:26:57 cabrio last message repeated 2 times
Oct 3 09:26:58 cabrio pppd[1126]: Hangup (SIGHUP)
Oct 3 09:26:58 cabrio pppd[1126]: Modem hangup
Oct 3 09:26:58 cabrio pppd[1126]: Connection terminated.
Oct 3 09:26:59 cabrio pppd[1126]: Exit.
The PPP Howoto (Section 7.10) says - "Linux does not support RPI
modems. If your modem is RPI then you will have to find a different
modem. This is not likely to change in the future given the statements
made by Rockwell's management. Examine the systel log when you use the
debug option. If the trace shows that the it isw sending the
LCP-request frame over and over again and the id number is not
incrementing then you are not exchanging frames with the remote PPP
software."
Can somebody help me get dial up working? I am at my wits end.
S.
Reply to: