Re: debian 2.0, keyboard conflict with PCMCIA
Here is some more info from syslog, it seems like everything is loaded fine,
and then one of these hits:
Sep 5 21:11:36 ankle kernel: 3c589_release(0x0027cce4)
But it loads back up immediately after it finishes unloading.
And still, the machine goes for long periods of successful network activity
if I'm not typing on the console keyboard, these unload/load cycles only
occur when I type directly on the machine's own keyboard.
Eventually, it crashes.
Sep 5 21:04:28 ankle syslogd 1.3-3#26: restart.
Sep 5 21:04:28 ankle kernel: Linux PCMCIA Card Services 3.0.4
Sep 5 21:04:28 ankle kernel: kernel build: 2.0.34 #15 Mon Aug 31 21:05:40 PDT 1998
Sep 5 21:04:28 ankle kernel: options: [pci] [apm]
Sep 5 21:04:28 ankle kernel: cs.c 1.193 1998/07/18 09:55:19 (David Hinds)
Sep 5 21:04:28 ankle kernel: i82365.c 1.195 1998/07/18 09:39:24 (David Hinds)
Sep 5 21:04:28 ankle kernel: Intel PCIC probe:
Sep 5 21:04:28 ankle kernel: Cirrus PD6729 PCI at port 0x3e0 ofs 0x00, 2 sockets
Sep 5 21:04:28 ankle kernel: host opts [0]: [ring] [1/6/8] [1/20/8]
Sep 5 21:04:28 ankle kernel: host opts [1]: [ring] [1/6/8] [1/20/8]
Sep 5 21:04:28 ankle kernel: ISA irqs (default) = 3,4,5,7,9,10,11,12 status change on irq 11
Sep 5 21:04:28 ankle kernel: cs: register_ss_entry(2, 0x0381e8d0)
Sep 5 21:04:28 ankle kernel: ds.c $Revision: 1.85 $ $Date: 1998/07/14 09:23:49 $ (David Hinds)
Sep 5 21:04:28 ankle cardmgr[96]: starting, version is 3.0.4
Sep 5 21:04:28 ankle kerneld: started, pid=103, qid=0
Sep 5 21:04:28 ankle kernel: ds_open(socket 0)
Sep 5 21:04:28 ankle kernel: ds_open(socket 1)
Sep 5 21:04:28 ankle kernel: ds_open(socket 2)
Sep 5 21:04:28 ankle cardmgr[96]: watching 2 sockets
Sep 5 21:04:28 ankle kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Sep 5 21:04:28 ankle kernel: cs: IO port probe 0x0800-0x08ff: clean.
Sep 5 21:04:28 ankle kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f 0x4d0-0x4d7
Sep 5 21:04:28 ankle cardmgr[96]: initializing socket 0
Sep 5 21:04:28 ankle kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
Sep 5 21:04:28 ankle cardmgr[96]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:04:28 ankle cardmgr[96]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:04:29 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:04:29 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:04:29 ankle kernel: 3c589_attach()
Sep 5 21:04:29 ankle kernel: 3c589_config(0x0027cce4)
Sep 5 21:04:29 ankle kernel: loading device 'eth0'...
Sep 5 21:04:29 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:04:29 ankle cardmgr[96]: executing: './network start eth0'
Sep 5 21:04:29 ankle apmd[118]: Version 2.4 (APM BIOS 1.1, Linux driver 1.2)
Sep 5 21:04:29 ankle apmd[118]: Battery: * * * (100% 0:01)
Sep 5 21:04:36 ankle kernel: eth0: autodetected 10baseT
Sep 5 21:04:39 ankle innd: SERVER descriptors 256
Sep 5 21:04:39 ankle innd: SERVER outgoing 243
Sep 5 21:04:39 ankle innd: SERVER ccsetup control:11
Sep 5 21:04:39 ankle innd: SERVER lcsetup localconn:13
Sep 5 21:04:39 ankle innd: SERVER rcsetup remconn:4
Sep 5 21:04:40 ankle innd: overview spawned overview:16:proc:192
Sep 5 21:04:40 ankle innd: SERVER starting
Sep 5 21:04:43 ankle /usr/sbin/cron[206]: (CRON) STARTUP (fork ok)
Sep 5 21:04:51 ankle in.smtpd[232]: connect from vortex.uplanet.com
Sep 5 21:11:36 ankle kernel: 3c589_release(0x0027cce4)
Sep 5 21:11:37 ankle cardmgr[96]: shutting down socket 0
Sep 5 21:11:37 ankle cardmgr[96]: executing: './network stop eth0'
Sep 5 21:11:37 ankle kernel: 3c589_detach(0x0027cce4)
Sep 5 21:11:37 ankle kernel: 3c589_release(0x0027cce4)
Sep 5 21:11:37 ankle cardmgr[96]: executing: 'rmmod 3c589_cs'
Sep 5 21:11:37 ankle kernel: 3c589_cs: unloading
Sep 5 21:11:37 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:11:37 ankle kernel: 3c589_detach(0x0027cce4)
Sep 5 21:11:37 ankle cardmgr[96]: initializing socket 0
Sep 5 21:11:37 ankle cardmgr[96]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:11:37 ankle cardmgr[96]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:11:37 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:11:37 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:11:37 ankle kernel: 3c589_attach()
Sep 5 21:11:37 ankle kernel: 3c589_config(0x0027cbe8)
Sep 5 21:11:37 ankle kernel: loading device 'eth0'...
Sep 5 21:11:37 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:11:37 ankle cardmgr[96]: executing: './network start eth0'
Sep 5 21:11:41 ankle kernel: 3c589_release(0x0027cbe8)
Sep 5 21:11:41 ankle cardmgr[96]: shutting down socket 0
Sep 5 21:11:41 ankle cardmgr[96]: executing: './network stop eth0'
Sep 5 21:11:42 ankle kernel: 3c589_detach(0x0027cbe8)
Sep 5 21:11:42 ankle kernel: 3c589_release(0x0027cbe8)
Sep 5 21:11:42 ankle cardmgr[96]: executing: 'rmmod 3c589_cs'
Sep 5 21:11:42 ankle kernel: 3c589_cs: unloading
Sep 5 21:11:42 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:11:42 ankle kernel: 3c589_detach(0x0027cbe8)
Sep 5 21:11:42 ankle cardmgr[96]: initializing socket 0
Sep 5 21:11:42 ankle cardmgr[96]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:11:42 ankle cardmgr[96]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:11:42 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:11:42 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:11:42 ankle kernel: 3c589_attach()
Sep 5 21:11:42 ankle kernel: 3c589_config(0x0027c9f0)
Sep 5 21:11:42 ankle kernel: loading device 'eth0'...
Sep 5 21:11:42 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr FF:FF:FF:FF:FF:FF
Sep 5 21:11:42 ankle cardmgr[96]: executing: './network start eth0'
Sep 5 21:11:42 ankle kernel: 3c589_release(0x0027c9f0)
Sep 5 21:11:42 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:42 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:42 ankle cardmgr[96]: + SIOCSIFADDR: Operation not supported by device
Sep 5 21:11:42 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:42 ankle cardmgr[96]: + SIOCSIFNETMASK: Operation not supported by device
Sep 5 21:11:42 ankle cardmgr[96]: + SIOCSIFBRDADDR: Operation not supported by device
Sep 5 21:11:42 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:42 ankle cardmgr[96]: + SIOCADDRT: Operation not supported by device
Sep 5 21:11:42 ankle cardmgr[96]: + SIOCADDRT: Network is unreachable
Sep 5 21:11:42 ankle cardmgr[96]: shutting down socket 0
Sep 5 21:11:42 ankle cardmgr[96]: executing: './network stop eth0'
Sep 5 21:11:42 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:43 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:43 ankle kernel: 3c589_detach(0x0027c9f0)
Sep 5 21:11:43 ankle cardmgr[96]: executing: 'rmmod 3c589_cs'
Sep 5 21:11:43 ankle kernel: 3c589_cs: unloading
Sep 5 21:11:43 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:11:43 ankle cardmgr[96]: initializing socket 0
Sep 5 21:11:43 ankle cardmgr[96]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:11:43 ankle cardmgr[96]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:11:43 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:11:43 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:11:43 ankle kernel: 3c589_attach()
Sep 5 21:11:43 ankle kernel: 3c589_config(0x0027cbe8)
Sep 5 21:11:43 ankle kernel: loading device 'eth0'...
Sep 5 21:11:43 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:11:43 ankle cardmgr[96]: executing: './network start eth0'
Sep 5 21:11:43 ankle kernel: 3c589_release(0x0027cbe8)
Sep 5 21:11:43 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:43 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:43 ankle cardmgr[96]: + SIOCSIFADDR: Operation not supported by device
Sep 5 21:11:43 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:43 ankle cardmgr[96]: + SIOCSIFNETMASK: Operation not supported by device
Sep 5 21:11:43 ankle cardmgr[96]: + SIOCSIFBRDADDR: Operation not supported by device
Sep 5 21:11:43 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:43 ankle cardmgr[96]: + SIOCADDRT: Operation not supported by device
Sep 5 21:11:43 ankle cardmgr[96]: + SIOCADDRT: Network is unreachable
Sep 5 21:11:44 ankle cardmgr[96]: shutting down socket 0
Sep 5 21:11:44 ankle cardmgr[96]: executing: './network stop eth0'
Sep 5 21:11:44 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:44 ankle cardmgr[96]: + eth0: unknown interface.
Sep 5 21:11:44 ankle kernel: 3c589_detach(0x0027cbe8)
Sep 5 21:11:44 ankle cardmgr[96]: executing: 'rmmod 3c589_cs'
Sep 5 21:11:44 ankle kernel: 3c589_cs: unloading
Sep 5 21:11:44 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:11:44 ankle cardmgr[96]: initializing socket 0
Sep 5 21:11:44 ankle cardmgr[96]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:11:44 ankle cardmgr[96]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:11:44 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:11:44 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:11:44 ankle kernel: 3c589_attach()
Sep 5 21:11:44 ankle cardmgr[96]: get dev info on socket 0 failed: Operation not supported by device
Sep 5 21:11:44 ankle kernel: 3c589_detach(0x0027caec)
Sep 5 21:11:44 ankle cardmgr[96]: shutting down socket 0
Sep 5 21:11:44 ankle cardmgr[96]: executing: 'rmmod 3c589_cs'
Sep 5 21:11:45 ankle kernel: 3c589_cs: unloading
Sep 5 21:11:45 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:11:45 ankle cardmgr[96]: initializing socket 0
Sep 5 21:11:45 ankle cardmgr[96]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:11:45 ankle cardmgr[96]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:11:45 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:11:45 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:11:45 ankle kernel: 3c589_attach()
Sep 5 21:11:45 ankle kernel: 3c589_config(0x0027cce4)
Sep 5 21:11:45 ankle kernel: loading device 'eth0'...
Sep 5 21:11:45 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:11:45 ankle cardmgr[96]: executing: './network start eth0'
Sep 5 21:11:50 ankle kernel: eth0: autodetected 10baseT
Sep 5 21:14:00 ankle /USR/SBIN/CRON[352]: (news) CMD (rnews -U)
Sep 5 21:14:00 ankle innd: localhost connected 15
Sep 5 21:14:01 ankle innd: localhost:15 closed seconds 1 accepted 0 refused 0 rejected 0
Sep 5 21:19:45 ankle syslogd 1.3-3#26: restart.
Sep 5 21:19:45 ankle kernel: Linux PCMCIA Card Services 3.0.4
Sep 5 21:19:45 ankle kernel: kernel build: 2.0.34 #15 Mon Aug 31 21:05:40 PDT 1998
Sep 5 21:19:45 ankle kernel: options: [pci] [apm]
Sep 5 21:19:45 ankle kernel: cs.c 1.193 1998/07/18 09:55:19 (David Hinds)
Sep 5 21:19:45 ankle kernel: i82365.c 1.195 1998/07/18 09:39:24 (David Hinds)
Sep 5 21:19:45 ankle kernel: Intel PCIC probe:
Sep 5 21:19:45 ankle kernel: Cirrus PD6729 PCI at port 0x3e0 ofs 0x00, 2 sockets
Sep 5 21:19:45 ankle kernel: host opts [0]: [ring] [1/6/8] [1/20/8]
Sep 5 21:19:45 ankle kernel: host opts [1]: [ring] [1/6/8] [1/20/8]
Sep 5 21:19:45 ankle kernel: ISA irqs (default) = 3,4,5,7,9,10,11,12 status change on irq 11
Sep 5 21:19:45 ankle kernel: cs: register_ss_entry(2, 0x0381e8d0)
Sep 5 21:19:45 ankle kernel: ds.c $Revision: 1.85 $ $Date: 1998/07/14 09:23:49 $ (David Hinds)
Sep 5 21:19:45 ankle cardmgr[110]: starting, version is 3.0.4
Sep 5 21:19:46 ankle kerneld: started, pid=117, qid=0
Sep 5 21:19:46 ankle kernel: ds_open(socket 0)
Sep 5 21:19:46 ankle kernel: ds_open(socket 1)
Sep 5 21:19:46 ankle kernel: ds_open(socket 2)
Sep 5 21:19:46 ankle cardmgr[110]: watching 2 sockets
Sep 5 21:19:46 ankle kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Sep 5 21:19:46 ankle kernel: cs: IO port probe 0x0800-0x08ff: clean.
Sep 5 21:19:46 ankle kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f 0x4d0-0x4d7
Sep 5 21:19:46 ankle cardmgr[110]: initializing socket 0
Sep 5 21:19:46 ankle kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
Sep 5 21:19:46 ankle cardmgr[110]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:19:46 ankle cardmgr[110]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:19:46 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:19:46 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:19:46 ankle kernel: 3c589_attach()
Sep 5 21:19:46 ankle kernel: 3c589_config(0x0027cde0)
Sep 5 21:19:46 ankle kernel: loading device 'eth0'...
Sep 5 21:19:46 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:19:46 ankle cardmgr[110]: executing: './network start eth0'
Sep 5 21:19:46 ankle apmd[130]: Version 2.4 (APM BIOS 1.1, Linux driver 1.2)
Sep 5 21:19:46 ankle apmd[130]: Battery: * * * (100% 0:01)
Sep 5 21:19:50 ankle kernel: eth0: autodetected 10baseT
Sep 5 21:19:52 ankle innd: SERVER descriptors 256
Sep 5 21:19:52 ankle innd: SERVER outgoing 243
Sep 5 21:19:53 ankle innd: SERVER ccsetup control:11
Sep 5 21:19:53 ankle innd: SERVER lcsetup localconn:13
Sep 5 21:19:53 ankle innd: SERVER rcsetup remconn:4
Sep 5 21:19:53 ankle innd: overview spawned overview:16:proc:202
Sep 5 21:19:53 ankle innd: SERVER renumbering
Sep 5 21:19:53 ankle innd: SERVER starting
Sep 5 21:19:55 ankle /usr/sbin/cron[216]: (CRON) STARTUP (fork ok)
Sep 5 21:20:50 ankle kernel: 3c589_release(0x0027cde0)
Sep 5 21:20:50 ankle cardmgr[110]: shutting down socket 0
Sep 5 21:20:50 ankle cardmgr[110]: executing: './network stop eth0'
Sep 5 21:20:50 ankle kernel: 3c589_detach(0x0027cde0)
Sep 5 21:20:50 ankle kernel: 3c589_release(0x0027cde0)
Sep 5 21:20:50 ankle cardmgr[110]: executing: 'rmmod 3c589_cs'
Sep 5 21:20:50 ankle kernel: 3c589_cs: unloading
Sep 5 21:20:50 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:20:50 ankle kernel: 3c589_detach(0x0027cde0)
Sep 5 21:20:50 ankle cardmgr[110]: initializing socket 0
Sep 5 21:20:50 ankle cardmgr[110]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:20:50 ankle cardmgr[110]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:20:50 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:20:50 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:20:50 ankle kernel: 3c589_attach()
Sep 5 21:20:50 ankle kernel: 3c589_config(0x0027cedc)
Sep 5 21:20:50 ankle kernel: loading device 'eth0'...
Sep 5 21:20:50 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:20:50 ankle cardmgr[110]: executing: './network start eth0'
Sep 5 21:21:27 ankle kernel: eth0: autodetected 10baseT
Sep 5 21:21:28 ankle kernel: 3c589_release(0x0027cedc)
Sep 5 21:21:28 ankle cardmgr[110]: shutting down socket 0
Sep 5 21:21:28 ankle cardmgr[110]: executing: './network stop eth0'
Sep 5 21:21:28 ankle kernel: 3c589_detach(0x0027cedc)
Sep 5 21:21:28 ankle kernel: 3c589_release(0x0027cedc)
Sep 5 21:21:28 ankle cardmgr[110]: executing: 'rmmod 3c589_cs'
Sep 5 21:21:28 ankle kernel: 3c589_cs: unloading
Sep 5 21:21:28 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:21:28 ankle kernel: 3c589_detach(0x0027cedc)
Sep 5 21:21:28 ankle cardmgr[110]: initializing socket 0
Sep 5 21:21:28 ankle cardmgr[110]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:21:28 ankle cardmgr[110]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:21:28 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:21:28 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:21:28 ankle kernel: 3c589_attach()
Sep 5 21:21:28 ankle kernel: 3c589_config(0x0027cde0)
Sep 5 21:21:28 ankle kernel: loading device 'eth0'...
Sep 5 21:21:28 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:21:28 ankle cardmgr[110]: executing: './network start eth0'
Sep 5 21:21:42 ankle kernel: eth0: autodetected 10baseT
Sep 5 21:22:22 ankle kernel: 3c589_release(0x0027cde0)
Sep 5 21:22:22 ankle cardmgr[110]: shutting down socket 0
Sep 5 21:22:22 ankle cardmgr[110]: executing: './network stop eth0'
Sep 5 21:22:22 ankle kernel: 3c589_detach(0x0027cde0)
Sep 5 21:22:22 ankle kernel: 3c589_release(0x0027cde0)
Sep 5 21:22:22 ankle cardmgr[110]: executing: 'rmmod 3c589_cs'
Sep 5 21:22:22 ankle kernel: 3c589_cs: unloading
Sep 5 21:22:22 ankle kernel: ds: unregister_pccard_driver('3c589_cs')
Sep 5 21:22:22 ankle kernel: 3c589_detach(0x0027cde0)
Sep 5 21:22:23 ankle cardmgr[110]: initializing socket 0
Sep 5 21:22:23 ankle cardmgr[110]: socket 0: 3Com 3c589 Ethernet
Sep 5 21:22:23 ankle cardmgr[110]: executing: 'insmod /lib/modules/2.0.34/pcmcia/3c589_cs.o'
Sep 5 21:22:23 ankle kernel: 3c589_cs.c 1.107 1998/06/05 00:19:29 (David Hinds)
Sep 5 21:22:23 ankle kernel: ds: register_pccard_driver('3c589_cs')
Sep 5 21:22:23 ankle kernel: 3c589_attach()
Sep 5 21:22:23 ankle kernel: 3c589_config(0x0027cedc)
Sep 5 21:22:23 ankle kernel: loading device 'eth0'...
Sep 5 21:22:23 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3, Auto port, hw_addr 00:60:97:41:81:78
Sep 5 21:22:23 ankle cardmgr[110]: executing: './network start eth0'
Sep 5 21:22:27 ankle kernel: eth0: autodetected 10baseT
On Sat, Sep 05, 1998 at 11:11:54AM -0700, jesse@spine.com wrote:
> I've successfully installed debian 2.0 on my thinkpad 560e, but I'm
> still getting frequent crashes. It boots and loads fine, and is
> network accessible, but seconds after I start typing on the keyboard
> it unloads the pcmcia card and reloads it. This behavior ONLY happens
> if I type on the machine's keyboard, I can telnet in from elsewhere
> and type all I like.
>
> I've tried this with two different cards, a 3com 3c589 and a motorola
> mariner, each exhibits the same behavior, and both work on a similar
> laptop in slackware (and on the failing laptop in windows).
>
> My log/messages file gets a whole series of these:
>
> Aug 30 19:57:49 ankle kernel: loading device 'eth0'...
> Aug 30 19:57:49 ankle kernel: eth0: 3Com 3c589, port 0x300, irq 3,
> Auto port, hw_addr 00:60:97:41:81:78
> Aug 30 19:57:49 ankle kernel: eth0: switched to 10baseT port
>
> And eventually it crashes the machine.
>
> Spread out in the log is also a random sampling of other errors, very
> inconsistent:
>
> Aug 30 15:01:31 ankle kernel: eth0: 91c92 hardware Tx buffer allocation failed, status 0xff.
> Aug 30 15:02:03 ankle kernel: eth0: SMC91c92 transmit timed out, Tx_status ff status ffff.
> Aug 30 15:02:03 ankle kernel: eth0: 91c92 hardware Tx buffer allocation failed, status 0xff.
> Aug 30 15:02:12 ankle kernel: smc91c92_cs: Unable to find hardware address.
> Aug 30 15:02:15 ankle kernel: smc91c92_cs: using 8-bit IO window.
> Aug 30 15:02:15 ankle kernel: smc91c92_cs: Yikes! Bad chip signature!
> Aug 30 15:02:15 ankle kernel: smc91c92_cs: Yikes! Bad chip signature!
> Aug 30 15:02:15 ankle kernel: eth0: 91c92 hardware Tx buffer allocation failed, status 0xff.
> Aug 30 15:02:45 ankle last message repeated 4 times
> Aug 30 15:03:00 ankle last message repeated 3 times
> Aug 30 16:05:34 ankle kernel: memory_cs: mem0: anonymous: unknown size
>
> But in spite of these ominous looking errors, the ethernet stays up
> fine (I was able to install debian via FTP!) as long as I don't type
> on the keyboard.
>
> The errors above are pretty rare, mostly it just cycles through the
> unloading/loading messages without any errors.
>
> I've tried excluding the IRQ/port, but that had no effect.
> /proc/interrupts and /proc/ioports look okay anyway:
>
> # cat /proc/interrupts
> 0: 3960057 timer
> 1: 4 keyboard
> 2: 0 cascade
> 3: 3119 3c589_cs
> 11: 1 i82365
> 12: 44 PS/2 Mouse
> 13: 1 math error
> 14: 210238 + ide0
> # cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : npu
> 01f0-01f7 : ide0
> 0300-030f : 3c589_cs
> 03c0-03df : vga+
> 03e0-03e1 : i82365
> 03f0-03f5 : floppy
> 03f6-03f6 : ide0
> 03f7-03f7 : floppy DIR
> 03f8-03ff : serial(set)
>
> (for completeness)
>
> # uname -a
> Linux ankle 2.0.34 #13 Sun Aug 30 21:17:55 PDT 1998 i586 unknown
>
> # lsmod
> Module Pages Used by
> psaux 1 1 (autoclean)
> 3c589_cs 2 1
> ds 2 [3c589_cs] 3
> i82365 4 2
> pcmcia_core 8 [3c589_cs ds i82365] 4
>
> I've read everything I can find, and the only person I found with the
> same error gave up on his machine. Does anyone have any ideas?
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
Reply to: