[3] AWE 64, Sound blaster...........
Hi,
I cannot stil find AWE32 support ........;(
Well i find ``Additional low level drivers. When i
select it then apears the ``ACI mixer (microPCM12)'', but nothing more.
Here what i see inside sound menu:
|<M> Sound card support
|
| |Old configuration script (For: SM Wave, PSS & AudioTrix Pro) -->
| |
| |[ ] ProAudioSpectrum 16 support
| |
| |[*] Sound Blaster (SB, SBPro, SB16, clones) support
| |
| |[*] Generic OPL2/OPL3 FM synthesizer support
| |
| |[ ] Gravis Ultrasound support
| |
| |[ ] MPU-401 support (NOT for SB16)
| |
| |[ ] 6850 UART Midi support
| |
| |[ ] PSS (ECHO-ADI2111) support
| |
| |[ ] 16 bit sampling option of GUS (_NOT_ GUS MAX)
| |[ ] GUS MAX support
| |
| |[ ] Microsoft Sound System support
| |
| |[ ] Ensoniq SoundScape support
| |
| |[ ] MediaTrix AudioTrix Pro support
| |
| |[ ] Support for MAD16 and/or Mozart based cards
| |
| |[ ] Support for Crystal CS4232 based (PnP) cards
| |
| |[ ] Support for Turtle Beach Wave Front (Maui, Tropez)
synthesizers | |
| |[*] /dev/dsp and /dev/audio support
| |
| |[*] MIDI interface support
| |
| |[*] FM synthesizer (YM3812/OPL-3) support
| |(260) I/O base for SB Check from manual of the card
| |
| |(10) Sound Blaster IRQ Check from manual of the card
| |
| |(3) Sound Blaster DMA 0, 1 or 3
| |
| |(7) Sound Blaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) 5,
6 o
| |(0) MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual
of t
| |(-1) SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Use -1 with SB16
| |
| |(65536) Audio DMA buffer size 4096, 16384, 32768 or 65536
| |
| |[*] Additional low level drivers
| |
| |[*] ACI mixer (miroPCM12)
Thanks, Phillip Neumann, filsin@bigfoot.com
>On Sun, 16 Aug 1998, phillip Neumann wrote:
>
>> Hi,
>>
>> I have try to do that. When i run the install script linux said:
>>
>> [root@Proton] /usr/src/awedrv --> ./install.sh
>> Linux source root directory [/usr/src/linux]
>> checking the version of installed sound driver..
>> sound driver is USS
>> copying source files: awe_wave.c awe_hw.h awe_version.h
awe_compat.h
>> copying header files: awe_voice.h
>> copying config file
>> done.
>>
>> Please configure and remake linux kernel (and modules).
>> Answer YES to 'AWE32 synth support' in Sound menu
>> when configuring your kernel.
>> Also, you should keep other SoundBlaster options, too.
>>
>> Then i look at the kernel configration (make menuconfig), and nothing
>> new apears (in sound menu). Nothing about AWE32. What am i doing
wrong?
>>
>>
>> Thanks, Phillip Neumann, filsin@bigfoot.com
>>
>you must look in the sound section on lowleveldriver
>with the acm mixer u will find also the awe driver
>
>samuele tonon
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Reply to: