Re: Download speed

[Sture Palminger <sturepal@dalnet.se>]

Hi Troy

Thanks for your message. 
Yes this is a pppd connection.I have played around with mtu and mru but ther is 
no bigger change.
Did your second suggestion and dialed upp the only BBS available around here. 
The download speed was ~1.5 Kb/s ???? (run with minicom 115200 8N1 CTS/RTS).
The speed reported by BBS (CONNECT 115200) , my port settings are ttyS1 
UART:16550A,port:0x02f8, IRQ 3,baud_base:115200 and initialization string ATF
(factory configured).
Have to dig into this.

Regards
Sture


 

On 19-Jun-98 Troy Hanson wrote:
>Is this with pppd connection?  If so:  Try using the utility setserial to
>set speed to spd_vhi (115200), also, setting the MTU and MRU to 576 helps a
>bit.  (pppd options)
>
>If the progam is with direct serial (e.g. BBS, make sure you have the speed
>set to 115200 in the program).  This could be a good test if your problem
>is with ppp connections.  You can dial up to a BBS and try a Zmodem
>download, and see what kind of througput you get there (should be around
>3.5k/sec on 33.6k modem)
>
>Hope this helps!
>troy

 


--  
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org