Re: Printing
Hello
Did you make sure that you have printer support in kernel. Once I had the
problem then I recompiled kernel with printer support and everything was
fine...
Nikhil
On Fri, 19 Jun 1998, Tod Detre wrote:
> I'm having problems printing. I have a laserjet compatible. I can get it
> to work by running gs and having it directly output to /dev/lp1 so I know
> the print/port is set up right, but when I try to use lpr I get nothing.
> I'm using magicfilter and at this point I'm just trying to get postscript
> to work. I've included a copy of my /etc/printcap and the configfile for
> magicconfig.
>
> -- Printcap
>
> # You can use the filter entries df, tf, cf, gf etc. for
> # your own filters. See /etc/filter.ps, /etc/filter.pcl and
> # the printcap(5) manual page for further details.
>
> lp|BIGBOY:\
> :lp=/dev/lp1:\
> :sd=/var/spool/lpd/lp:\
> # :df=/etc/filter.ps:\
> # :tf=/etc/filter.pcl:\
> # :af=/var/log/lp-acct:\
> # :lf=/var/log/lp-errs:\
> # :pl#66:\
> # :pw#80:\
> # :pc#150:\
> :if=/var/spool/lpd/lp/filter:\
> :mx#0:\
> :sh:
>
> # rlp|Remote printer entry:\
> # :lp=:\
> # :rm=remotehost:\
> # :rp=remoteprinter:\
> # :sd=/var/spool/lpd/remote:\
> # :mx#0:\
> # :sh:
>
> -- filter
>
> #! /usr/sbin/magicfilter
> default filter /usr/bin/gs -q -dSAFER -sDEVICE=laserjet -dNOPAUSE -sOUTPUTFILE=-
>
>
> --
>
> Tod Detre |"Losers whine about their best, winners go home and @%^& the
> | prom queen." -Sean Connery (The Rock)
> |"It is TOD not TODD! Do you see God spelling his name
> | Godd?" -Me
>
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to:
- References:
- Printing
- From: Tod Detre <tod@Gandalf.cwru.edu>