new xbase shuts down consistently
Hi. Just installed the new xbase package, and every few minutes X just quits
by itself, no prompting. Sometimes I'm not even in X when it happens.
Here's what I get in /var/log/xdm-errors:
XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.32 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
<SNIP>
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "mymap(us_dvorak)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 70ms)
(**) SVGA: Graphics device ID: "Matrox Mystique"
(**) SVGA: Monitor ID: "AcerView 78ie"
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/freefont/"
(--) SVGA: PCI: Matrox MGA 1064SG rev 2, Memory @ 0xe6800000, 0xe7800000
(--) SVGA: Linear framebuffer at 0xE7800000
(--) SVGA: MMIO registers at 0xE6800000
(--) SVGA: Video BIOS info block at 0x000c7da0
(--) SVGA: Found and verified enhanced Video BIOS info block
Using BIOS value for maxPixelClock: 170000 kHz
(--) SVGA: chipset: mga1064sg
(--) SVGA: videoram: 4096k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 170.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 98.900
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us_dvorak -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/mymap compiled/mymap.xkm'
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
xdm error (pid 199): Server for display :0 terminated unexpectedly: 1536
------
Any insight would be appreciated, though from this error I don't think anyone
can tell what's wrong unless it's a known problem. How do I get the previous
version again... is there a place that archives old .debs?
--
kiyan@iname.com A scientific truth does not triumph by convincing
A. Kiyan Azarbar its opponents and making them see the light, but
Ottawa, Canada rather because its opponents eventually die and a
Linux 2.0.33 new generation grows up that is familiar with it.
1024/0x9A9EC5EA 4F3ADBDA1EE5850209DD8BB205250ED2F696A7BE ^- Max Planck
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: