[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

cdrom gone after kernel compile



[cc'd to debian-user mailing list]

After compiling a more modularized kernel today (using Debian 1.3.1 with
kernel src 2.0.32) I've lost my cdrom- everything was working perfectly
with the bloated standard kernel...
When I try "mount -t iso9660 /dev/scd0 /cdrom" I see something like "fs
type iso9660 not supported by kernel". Fine- I made it available as a
module- why isn't kerneld picking that up? (kerneld *is* running) So, I
"insmod isofs". No luck- I see
"mount: the kernel does not recognize /dev/scd0 as a block device (maybe
'insmod driver'?)"
So, I try "insmod cdrom" to no avail.

The hardware is fine- I'm using the Adaptec 1542 driver (the card is a
1535- same but no bios) with a pretty vanilla SCSI-II dual speed
(Compaq) cdrom. Both the support for the card and generic scsi support
are compiled directly in, not as modules.

I'm attaching my /usr/src/linux/.config- I can't figure out why things
aren't working! (I apologize for the length of this post)

Any hints would be appreciated...

Thanks!

John Szumowski
harpo@javanet.com
#
# Automatically generated by make menuconfig: don't edit
#

#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y

#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
# CONFIG_PCI is not set
# CONFIG_MCA is not set
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_M486=y
# CONFIG_BIGPHYS_AREA is not set

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
# CONFIG_FIREWALL is not set
# CONFIG_NET_ALIAS is not set
CONFIG_INET=y
# CONFIG_IP_FORWARD is not set
# CONFIG_IP_MULTICAST is not set
CONFIG_SYN_COOKIES=y
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
# CONFIG_SKB_LARGE is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_NETLINK is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
CONFIG_SCSI_AHA1542=y
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=m
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_NFS_FS is not set
# CONFIG_SMB_FS is not set
CONFIG_ISO9660_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Character devices
#
CONFIG_SERIAL=m
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=m
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set

Reply to: