Re: Question - Hamm, Mgetty, PPP, wtmp - Arrgh!
Jeff Noxon wrote:
> > > > > On Mon, Feb 16, 1998 at 01:06:59PM -0600, Jeff Noxon wrote:
> > > > >> I have three dial-in modems on my hamm box. They are all identical
> > > > >> USR Couriers AFIAK, and their configuration *appears* to be the same.
> > > > >> But one port always shows connect speed in wtmp, and the others do not:
> > > > >
> > > The modem settings are identical. The modem firmware revisions are
> > > identical. The mgetty configuration lines are the same. The inittab
> > > lines are the same. This is really bizarre. It used to work with bo,
> > > and one of my mgetty upgrades killed it a long time back. I asked back
> > > then, and nobody offered to help.
> >
> > So when you shuffle the modems around on the ports, does the same port
> > show the speed, or the same modem? At least that should eliminate the
> > possibility of differing modems.
>
> I just tried to shuffle modems. Only /dev/ttyC1 shows connect speeds.
> That rules out modem settings.
That makes me thing you need to look at /etc/mgetty.config. Check the
per-port init strings.
Tim
--
(work) sailer@bnl.gov / (home) tps@buoy.com - http://www.buoy.com/~tps
It works better if you plug it in.
** Disclaimer: My views/comments/beliefs, as strange as they are, are my own.**
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: