Re: ZIP IDE
On Tue, 30 Sep 1997, Steve Hsieh wrote:
Actually ... it is a scsi... parallel port is a kind of scsi and under
linux is seen as a true scsi device (and is faster than in dos)
Here is how it comes up:
scsi0 : PPA driver version 0.26 using 4-bit mode on port 0x378.
scsi : 1 host.
Vendor: IOMEGA Model: ZIP 100 Rev: D.09
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
sda: Write Protect is off
Partition check:
sda: sda4
My kernel is 2.0.30
Now, there have been troubles with the internal model, maybe we are
talking about that one and not the external one?
Chad
> The zip IDE is not a scsi device; the scsi driver won't work with it.
> However, I believe there is support for it in the new developmental 2.1.x
> kernels, something having to do with having full IDE ATAPI support. I
> don't know what the status of it is though.
>
>
> On Tue, 30 Sep 1997, Chad D. Zimmerman wrote:
>
> > On Tue, 30 Sep 1997, Pierre GAMBAROTTO wrote:
> >
> > >
> > > All is in the subject. How can I use a iomega zip with
> > > an IDE interface with linux ?
> > >
> >
> > By default the kernel has support precompiled in for zip. As long as it
> > is connected at turn on, it will be found as /dev/sda4 (or sba4, i forget
> > which)
> >
> > Other wise, compile a kernal, include scsi support, zip is under the scsi
> > section.
> >
> >
> > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> > Chad D. Zimmerman chad@dabcc-www.nmsu.edu
> > Southwest Technology Development Institute
> > New Mexico State University
> > ---
> > HP: http://dabcc-www.nmsu.edu/~chad/
> > DBP: http://dabcc-www.nmsu.edu/~chad/Debian/
> > LCAO: http://dabcc-www.nmsu.edu/~chad/Las_Cruces_Art/
> > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> >
> >
> > --
> > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
> > debian-user-request@lists.debian.org .
> > Trouble? e-mail to templin@bucknell.edu .
> >
>
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Chad D. Zimmerman chad@dabcc-www.nmsu.edu
Southwest Technology Development Institute
New Mexico State University
---
HP: http://dabcc-www.nmsu.edu/~chad/
DBP: http://dabcc-www.nmsu.edu/~chad/Debian/
LCAO: http://dabcc-www.nmsu.edu/~chad/Las_Cruces_Art/
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to:
- Follow-Ups:
- Re: ZIP IDE
- From: Remco Blaakmeer <remco@cal011205.student.utwente.nl>