[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: 1.3.1 Upgrading Probs



Peter,

I had a similar problem once.  Check the file /etc/inetd.conf
My had been overwritten once when upgrading a while back.  Make sure the
services you want to allow are enabled.

Dave
golpira@delanet.com

	----------
	From:  Peter Weiss[SMTP:Peter.Weiss@Informatik.Uni-Oldenburg.DE]
	Sent:  Wednesday, August 06, 1997 9:58 AM
	To:  debian-user@lists.debian.org
	Subject:  1.3.1 Upgrading Probs

	Hello there,

	    maybe you can help -- I didn't expect these problems when
upgrading to
	    1.3.1. the upgrade itself went smoothly but now I'm unable
to use any of
	    my networking interfaces:

	    The network devices (eth0 and lo0) are set up correctly, I
can do a ping
	    but all other services like telnet/ rlogin and ftp return a
"connection
	    refused error" after a timeout.

	    The netdevices look as they should:
	      # ifconfig
	      lo        Link encap:Local Loopback  
	                inet addr:127.0.0.1  Bcast:127.255.255.255
Mask:255.0.0.0
	                UP BROADCAST LOOPBACK RUNNING  MTU:3584
Metric:1
	                RX packets:59351 errors:0 dropped:0 overruns:0
	                TX packets:59351 errors:0 dropped:0 overruns:0

	      eth0      Link encap:10Mbps Ethernet  HWaddr
00:00:C0:56:5F:A4
	                inet addr:193.96.166.51  Bcast:193.96.166.255
Mask:255.255.255.0
	                UP BROADCAST RUNNING MULTICAST  MTU:1500
Metric:1
	                RX packets:0 errors:0 dropped:0 overruns:0
	                TX packets:0 errors:31 dropped:0 overruns:0
	                Interrupt:10 Base address:0x250
Memory:d0000-d4000 


	    # route -n
	Kernel IP routing table
	Destination     Gateway         Genmask         Flags Metric Ref
Use Iface
	193.96.166.0    0.0.0.0         255.255.255.0   U     0      0
1 eth0
	127.0.0.0       0.0.0.0         255.0.0.0       U     0      0
2 lo

	    The Gateway addresses sound quite strange to me. Maybe this
causes the
	    problem?

	    I'm starting the network services with a slightly modified
version of the
	    standard network script:

	      # Configure the loopback device.
	      ifconfig lo 127.0.0.1
	      route add -net 127.0.0.0 dev lo

	      # Configure the ethernet device or start SLIP/PPP below.
	      IPADDR="193.96.166.51"
	      NETMASK="255.255.255.0"
	      NETWORK="193.96.166.0"
	      BROADCAST="193.96.166.255"
	      GATEWAY=""

	      /sbin/ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast
${BROADCAST}
	      /sbin/route add -net ${NETWORK}
	      [ ! -z "$GATEWAY" ] && /sbin/route add default gw
${GATEWAY} 

	    Having spend over a day with upgrading I'm frustrated and
would appreciate
	    any help. BTW: The script worked with no probs and on the
same hardware
	    with 1.2.x debian.

	    It seems to be no library or configuration problem on the
rlogin's side,
	    cause when I'm connected to my ISP all services work.

	            Thanks -- Peter

	-- 

------------------------------------------------------------------------
------
	Peter Weiss, Sonnenstraße 17, D-26123 Oldenburg, Tel:  0441/
81058
	http://www.informatik.uni-oldenburg.de:/~weissp

------------------------------------------------------------------------
------
	-- Slow has got 4 letters so has calm; speed has got 5 letters
so has death --

------------------------------------------------------------------------
------


	--
	TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
"unsubscribe" to
	debian-user-request@lists.debian.org . 
	Trouble?  e-mail to templin@bucknell.edu .


--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble?  e-mail to templin@bucknell.edu .


Reply to: