Re: 1.3.1 Upgrading Probs
You should have your gateway in your network startup file
(/etc/init.d/network ?). Now you have only GATEWAY="" and it does not look
right.
After running the modified network startup script the route command should
output something like this:
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
193.96.166.0 0.0.0.0 255.255.255.0 U 0 0 1 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 2 lo
0.0.0.0 193.96.166.1 0.0.0.0 UG 1 0 1 eth0
^^^^^^^^^^^^
GATEWAY in the network startup file
Otherwise the ifconfig and route output look ok.
Peter Weiss wrote:
>
[cut]
> # route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 193.96.166.0 0.0.0.0 255.255.255.0 U 0 0 1 eth0
> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 2 lo
>
[cut]
>
> I'm starting the network services with a slightly modified version of
> the standard network script:
[cut]
> # Configure the ethernet device or start SLIP/PPP below.
> IPADDR="193.96.166.51"
> NETMASK="255.255.255.0"
> NETWORK="193.96.166.0"
> BROADCAST="193.96.166.255"
> GATEWAY=""
[cut]
// Heikki
--
Heikki Vatiainen * hessu@cs.tut.fi
Tampere University of Technology * Tampere, Finland
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: