[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Rogers Cable Access..a follow-up



On Tue, 10 Jun 1997, Richard Morin wrote:

> As the proud new "user" of a cable modem from Rogers cable here in
> Canada and I can say that the configuration was very easy.  No need for
> dhcpd(sp?) clients at all
> 
> 1. The ethernet device is a SMC Etherez 8416, which was supported by
> SMC-Ultra in the kernel. (I think other users may get a 3com...so either
> way the kernel supports them.)
> 
> 2. I was assigned a static IP address, told the netmask, and gateway
> machine.  
> 
> I set up the ethernet device, set up the routes, then changed my current
> configs to point at the new name servers, ect.....bingo.  It is very fast,
> but there aren't many people on it yet, remember this is just a test.  I
> grabbed a new kernel from sunsite with netscape in windows, and watched as
> it climbed to 34k/s.  I know it isn't scientific by any means, but that is
> 10X faster than anything I've achieved with my 28.8 modem.   

This is not the case with the Wave in Burlington, Ontario (via CableNet
which I think leases the technology from Rogers). IP addresses are
assigned dynamically and therefore dhcpcd is needed. I installed debian
and configured the network exactly as I would do in my office in Kingston
(permanently on net, static ip) but when it asked for ip, netmask, etc. I
just took the defaults (arbitrary addresses shown for example) because I
did not know what to put there instead. I grabbed the packages necessary
to get dhcpcd going with only the five base disks installed (netstd,
linreadline2, ncurses3.0,cpp,dhcpcd) and installed them with dpkg. I then
installed the dhcpcd package and looked in /etc/dhcpc/* and low and
behold, dhcpcd had already configured everything to get ip addresses from
cgocable.net. COOL. nothing else to do. Next, I fired up dselect and used
the ftp option and I now have a complete 1.3 system. 

Should some mention of this be put into the installation guide? 

> Price, when it rolls out is in the $50-60/month range, I knew you'd be
> curious.....no, I don't work for them..

This may sound expensive, but when you think about it, it seems fair to
me. Consider the alternative - installation and monthly charge of a second
phone line is around CAN$20, an isp is around CAN$20 (?), and considering
there may be download charges past a certain time limit with the isp
(and/or restrictions on the time of day) and that wave downloads are much
faster than standard phone line isps, it could be a bargain. Cheers,
Colin.

--
	  Colin R. Telmer, Institute of Intergovernmental Relations
		School of Policy Studies, Queen's University
		     Kingston, Ontario, Canada, K7L-3N6
	      (613)545-6000x4219   telmerco@qed.econ.queensu.ca
     PGP Fingerprint = 09 E9 DA 66 9C EE 33 DC  B8 3B 97 0E 01 BC EC 0B
	   PGP Public Key at <URL:http://terrapin.econ.queensu.ca>



--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org . 
Trouble?  e-mail to templin@bucknell.edu .


Reply to: