K3B ile hiç şey yapamıyorum...
Merhaba,
Testing sistemime K3B yazılımını kurdum. K3B'yi çalıştırdığımda cdrecord programını root olarak kullanmam gerektiğini belirten bir mesaj geliyor. K3B Sihirbaz root parolasıyla çalıştırıyorum. Açılan penceredeki ayarlar aşağıdaki gibi:
cdrecord 2.1.1a03 /usr/bin/cdrecord.mmap 0755 root.root 4711 root.root
cdrecord 2.1.1a03 /usr/X11/bin/cdrecord.mmap 0755 root.root 4711 root.root
"Uygula" düğmesine tıkladığımda "Tüm izinler güncellenemedi" hatasını veriyor ve ben de pencereyi kapatıyorum.
Data Cd' si oluşturmayı denedim fakat hata verip işlemi yarıda kesiyor.
CD kopyalamayı denedim, aynı hatayı onda da verip işlemi yazma kısmına geldiğinde kesiyor. Aşağıya hata dosyasının bir örneğini kopyalıyorum.
Yardımlarınız için şimdiden teşekkürler.
KDE Version: 3.5.3
QT Version: 3.3.6
Kernel: 2.6.17-1-k7
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL11 (/dev/hdd, ) at /media/cdrom1 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sıralı; DVD-R Çift Katman Sıralı; DVD-R Çift Katman Atlama; DVD-RAM; DVD-RW Kısıtlanmış Üzerine Yazma; DVD-RW Sıralı; DVD+RW; DVD+R; DVD+R Çift Katman; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
HL-DT-ST CD-RW GCE-8525B 1.03 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
K3b
-----------------------
Size of filesystem calculated: 2552
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.17-1-k7
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/X11/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/X11/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/X11/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version:
3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <
cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8525B '
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1951488 = 1905 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/X11/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
Track 01: data 4 MB
Total size: 5 MB (00:34.05) = 2554 sectors
Lout start: 6 MB (00:36/04) = 2554 sectors
cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=4893105 -tao driveropts=burnfree -eject -multi -xa -tsize=2552s -
mkisofs
-----------------------
2552
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-adem/k3btQI7Oa.tmp -rational-rock -hide-list /tmp/kde-adem/k3bTAv1pc.tmp -joliet -hide-joliet-list /tmp/kde-adem/k3bNzToNa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-adem/k3b4O9dDa.tmp
Reply to: