RE: external hard hisk
Diski takın, 5 saniye bekleyin sonda dmesg yazıp son 20-30 satırı gönderin
daha iyi olacak.
-----Original Message-----
From: Orçun ERÇORA [mailto:ortorigo@ortorigo.com]
Sent: Wednesday, April 19, 2006 3:24 PM
To: debian-user-turkish@lists.debian.org
Subject: Re: external hard hisk
dmesg gomukunu verdıgım zaman aşagıdaki çıktıyı alıyorum ncak vermıs
oldugunuz sekilde bir cıktı goremedım Yardımcı olursanız sevınırım
Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version
3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005 BIOS-provided
physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS)
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 223MB LOWMEM
available.
found SMP MP-table at 000f57f0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 57328
zone(0): 4096 pages.
zone(1): 53232 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 GBT ) @ 0x000f70d0
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0dff3000
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0dff3040
ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0dff6b80
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Unknown CPU
[15:3] APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) Using ACPI for processor
(LAPIC) configuration information Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2
Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: root=/dev/hdb1 ro
Initializing CPU#0
Detected 2412.354 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4810.34 BogoMIPS
Memory: 220844k/229312k available (1069k kernel code, 8084k reserved, 459k
data, 96k init, 0k highmem) Dentry cache hash table entries: 32768 (order:
6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072
bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer
cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash
table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 03 Enabling fast FPU save and
restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000 ESR value after enabling vector:
00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-12, 2-17, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 19.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178014
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0014
An unexpected IO-APIC was found. If this kernel release is less than three
months old please report this to linux-smp@vger.kernel.org .... register
#02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 69
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 001 01 0 0 0 0 0 1 1 71
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
10 001 01 1 1 0 1 0 1 1 89
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 91
13 001 01 1 1 0 1 0 1 1 99
14 001 01 1 1 0 1 0 1 1 A1
15 001 01 1 1 0 1 0 1 1 A9
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2412.2265 MHz.
..... host bus clock speed is 134.0124 MHz.
cpu: 0, clocks: 1340124, slice: 670062
CPU0<T0:1340112,T1:670048,D:2,S:670062,C:1340124>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfaf00, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS96x [1039/0008] at 00:02.0
PCI->APIC IRQ transform: (B0,I2,P2) -> 18 APIC IRQ transform: (B0,I3,P0)
PCI->-> 20 APIC IRQ transform: (B0,I3,P1) -> 21 APIC IRQ transform:
PCI->(B0,I3,P3) -> 23 APIC IRQ transform: (B0,I4,P0) -> 19 APIC IRQ
PCI->transform: (B0,I13,P0) -> 19 APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Initializing RT
netlink socket Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768) Linux IP
multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
hdb: SAMSUNG SP0802N, ATA DISK drive
blk: queue ce825c9c, I/O limit 4095Mb (mask 0xffffffff)
hdd: PHILIPS PCRW5232P, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on
irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdb: attached ide-disk driver.
hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=9733/255/63,
UDMA(100)
Partition check:
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 > Journalled Block Device
driver loaded kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 666656k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal Real Time
Clock Driver v1.10f
hdd: attached ide-cdrom driver.
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM
driver Revision: 3.12
sis900.c: v1.08.07 11/02/2003
00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 19, 00:0f:ea:21:97:00.
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 at 0xe400, 00:02:44:10:1d:5b, IRQ 19
eth1: Identified 8139 chip type 'RTL-8139B'
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices Intel 810 + AC97
Audio, version 1.01, 16:51:32 May 16 2005
i810: SiS 7012 found at IO 0xdc00 and 0xd800, MEM 0x0000 and 0x0000, IRQ 18
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 codec, id: ALG96 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not
present), total channels = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xce906000, IRQ 20
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xce908000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller
(#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
eth0: Media Link On 100mbps full-duplex
NTFS driver v1.1.22 [Flags: R/O MODULE]
Erçin EKER yazmış:
> Çrş, 2006-04-19 tarihinde 12:33 +0300 saatinde, Orçun ERÇORA yazdı:
>
>> Mount etmeye calıstıgım zaman aldıgım hata
>>
>> /dev/sda geçerli bir blok aygıtı değil
>>
>>
>
> Diski ilk taktığınızda dmesg çıktısında aygıtın hangi dosya ile
> ilişkinedirildiği bilgisi olur. Örneğin;
>
>
> SCSI device sdc: 2002944 512-byte hdwr sectors (1026 MB)
> sdc: Write Protect is off
> sdc: Mode Sense: 0b 00 00 08
> sdc: assuming drive cache: write through
> sdc: sdc1
>
> usb flash diskim /dev/sdc1 olarak kullanılabilir durumda, sizde dmesg
> komutunun vereceği çıktının sonunda bu bilgiyi bulabilirsiniz.
>
> İyi günler.
>
>
--
To UNSUBSCRIBE, email to debian-user-turkish-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
Reply to: