Re: meb toshiba debian sarge kurulum yardım gerekiyor
Sorun çözülmüştür, Daldım debian dünyasına :)
Nasıl çözüldü meb toshibasına debian sarge kurma problemi???
İşte Mehmet Ali Aksoy Hoca'nın bu mesajındaki bu link ile:
Çözüm Adresi :)
http://www.fazlamesai.net/modules.php?name=News&file=article&sid=2961
Mehmet Ali Aksoy'a ve ilgilenen herkese çok teşekkür ederim.
Hamza Hamzaoğlu
Linux Addict
On 7/7/05, hamza hamzaoğlu <sendirom@gmail.com> wrote:
> lspci lsusb ve dmesg ekledim; yardimlarinizi bekliyorum,
> sisteme takili ek aygit yok.
>
> root@ttyp1[knoppix]# lspci
> 00:00.0 Host bridge: Intel Corp.: Unknown device 3580 (rev 02)
> 00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02)
> 00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02)
> 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 3582 (rev 02)
> 00:02.1 Display controller: Intel Corp.: Unknown device 3582 (rev 02)
> 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
> 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
> 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 03)
> 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
> 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (rev 03)
> 00:1f.1 IDE interface: Intel Corp.: Unknown device 24ca (rev 03)
> 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 03)
> 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 03)
> 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 03)
> 02:01.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
> Controller (rev 02)
> 02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 02:04.0 Network controller: Intel Corp.: Unknown device 4220 (rev 05)
>
>
> root@ttyp1[knoppix]# lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 002 Device 002: ID 04b4:0001 Cypress Semiconductor Corp. Mouse
> Bus 001 Device 001: ID 0000:0000
>
>
>
> root@ttyp1[knoppix]# dmesg
> Linux version 2.4.20-xfs (root@Knoppix) (gcc version 2.95.4 20011002
> (Debian prerelease)) #1 SMP Mit Mär 26 15:37:36 CET 2003
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dee0000 (usable)
> BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data)
> BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS)
> BIOS-e820: 000000001df00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
> 478MB LOWMEM available.
> On node 0 totalpages: 122592
> zone(0): 4096 pages.
> zone(1): 118496 pages.
> zone(2): 0 pages.
> Kernel command line: ramdisk_size=100000 init=/etc/init lang=us
> apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi
> hdg=scsi hdh=scsi vga=791 initrd=miniroot.gz nomce quiet
> BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz
> ide_setup: hda=scsi
> ide_setup: hdb=scsi
> ide_setup: hdc=scsi
> ide_setup: hdd=scsi
> ide_setup: hde=scsi
> ide_setup: hdf=scsi
> ide_setup: hdg=scsi
> ide_setup: hdh=scsi
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> Detected 1594.857 MHz processor.
> Console: colour dummy device 80x25
> Calibrating delay loop... 3185.04 BogoMIPS
> Memory: 481868k/490368k available (1270k kernel code, 8112k reserved,
> 503k data, 128k init, 0k highmem)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: After generic, caps: afe9fbbf 00000000 00000000 00000000
> CPU: Common caps: afe9fbbf 00000000 00000000 00000000
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> Checking for popad bug... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> CPU: After generic, caps: afe9fbbf 00000000 00000000 00000000
> CPU: Common caps: afe9fbbf 00000000 00000000 00000000
> CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
> per-CPU timeslice cutoff: 0.00 usecs.
> SMP motherboard not detected.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1594.7715 MHz.
> ..... host bus clock speed is 99.6732 MHz.
> cpu: 0, clocks: 996732, slice: 498366
> CPU0<T0:996720,T1:498352,D:2,S:498366,C:996732>
> Waiting on wait_init_idle (map = 0x0)
> All processors have done init_idle
> PCI: PCI BIOS revision 2.10 entry at 0xfd789, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
> PCI: Using IRQ router PIIX [8086/24cc] at 00:1f.0
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> vesafb: framebuffer at 0xe8000000, mapped to 0xde80d000, size 32576k
> vesafb: mode is 1024x768x16, linelength=2048, pages=20
> vesafb: protected mode interface info at a5f3:1f5f
> vesafb: scrolling: redraw
> vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> pty: 256 Unix98 ptys configured
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24ca
> PCI: Device 00:1f.1 not available because of resource collisions
> PCI: Assigned IRQ 6 for device 00:1f.1
> PCI_IDE: BIOS setup was incomplete.
> PCI_IDE: chipset revision 3
> PCI_IDE: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
> hda: TOSHIBA MK4025GAS, ATA DISK drive
> hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 78140160 sectors (40008 MB), CHS=4864/255/63
> ide-cd: passing drive hdc to ide-scsi emulation.
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 >
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
> Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
> Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
> Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
> Highpoint HPT370 Softwareraid driver for linux version 0.01
> No raid array found
> SCSI subsystem driver Revision: 1.00
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: MATSHITA Model: UJDA760 DVD/CDRW Rev: 1.51
> Type: CD-ROM ANSI SCSI revision: 02
> Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.12
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 464k freed
> EXT2-fs warning: checktime reached, running e2fsck is recommended
> VFS: Mounted root (ext2 filesystem).
> NCR53c406a: no available ports found
> aec671x_detect:
> scsi: <fdomain> Detection failed (no card)
> megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
> megaraid: no BIOS enabled.
> DC390: 0 adapters found
> Failed initialization of WD-7000 SCSI card!
> ISO 9660 Extensions: Microsoft Joliet Level 3
> kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
> kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
> ISO 9660 Extensions: RRIP_1991A
> cloop: Welcome to cloop v0.68
> cloop: /cdrom/KNOPPIX/KNOPPIX: 28868 blocks, 65536 bytes/block,
> largest block is 65562 bytes.
> cloop: loaded (max 1 devices)
> ISO 9660 Extensions: RRIP_1991A
> Freeing unused kernel memory: 128k freed
> Real Time Clock Driver v1.10e
> apm: BIOS not found.
> Linux Kernel Card Services 3.1.22
> options: [pci] [cardbus] [pm]
> PCI: Found IRQ 10 for device 02:01.0
> Yenta IRQ list 0ab8, PCI irq10
> Socket status: 30000006
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0820-0x08ff: clean.
> cs: IO port probe 0x0800-0x080f: clean.
> cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 6 for device 00:1d.0
> PCI: Sharing IRQ 6 with 00:02.0
> PCI: Setting latency timer of device 00:1d.0 to 64
> usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 6
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Found IRQ 6 for device 00:1d.1
> PCI: Sharing IRQ 6 with 02:02.0
> PCI: Setting latency timer of device 00:1d.1 to 64
> usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 6
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> usbdevfs: remount parameter error
> hub.c: new USB device 00:1d.1-2, assigned address 2
> usb.c: USB device 2 (vend/prod 0x4b4/0x1) is not claimed by any active driver.
> usb.c: registered new driver usb_mouse
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI ISAPNP enabled
> PCI: Found IRQ 10 for device 00:1f.6
> PCI: Sharing IRQ 10 with 00:1f.3
> PCI: Sharing IRQ 10 with 00:1f.5
> PCI: Sharing IRQ 10 with 02:04.0
> input0: 4D Mouse USB Mouse on usb2:2.0
> usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
> usb.c: registered new driver hiddev
> usb.c: registered new driver hid
> hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
> hid-core.c: USB HID support drivers
> mice: PS/2 mouse device common for all mice
> i810_rng: cannot disable RNG, aborting
> i810_rng hardware driver 0.9.8 loaded
> 8139too Fast Ethernet driver 0.9.26
> PCI: Found IRQ 6 for device 02:02.0
> PCI: Sharing IRQ 6 with 00:1d.1
> eth0: RealTek RTL8139 Fast Ethernet at 0xe083f000, 00:c0:9f:8b:f7:a2, IRQ 6
> eth0: Identified 8139 chip type 'RTL-8139C'
> Intel 810 + AC97 Audio, version 0.21, 15:49:30 Mar 26 2003
> PCI: Found IRQ 10 for device 00:1f.5
> PCI: Sharing IRQ 10 with 00:1f.3
> PCI: Sharing IRQ 10 with 00:1f.6
> PCI: Sharing IRQ 10 with 02:04.0
> PCI: Setting latency timer of device 00:1f.5 to 64
> i810: Intel ICH4 found at IO 0x1880 and 0x1c00, IRQ 10
> i810_audio: Audio Controller supports 6 channels.
> ac97_codec: AC97 Modem codec, id: CXT48(Unknown)
> i810_audio: codec 0 is a softmodem - skipping.
> Journalled Block Device driver loaded
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> (recovery.c, 254): journal_recover: JBD: recovery, exit status 0,
> recovered transactions 2250 to 2345
> (recovery.c, 256): journal_recover: JBD: Replayed 706 and revoked 17/20 blocks
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding Swap: 618460k swap-space (priority -1)
> eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
> eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
> [drm:drm_init] *ERROR* Cannot initialize the agpgart module.
> apm: BIOS not found.
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 408M
> agpgart: no supported devices found.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> apm: BIOS not found.
> root@ttyp1[knoppix]#
> On 7/7/05, hamza hamzaoğlu <sendirom@gmail.com> wrote:
> > Herkese selam,
> > Debian sarge 2 dvd stable sürümden kurlumu başlattım ve bitirdim.
> > temel kurulumu yaptıktan sonra ilk açılışta aldığım ilk hata mesajı bu:
> >
> > /etc/rcS.d/S36discover: line 204: 1448 Segmentation fault modprobe $MODULE
> > loading uhci-hcd module
> > <6>usbcore: registered new driver usbfs
> > usbcore: registered new driver hub
> > USB Universal Host Controller Interface driver v2.2
> >
> > Debiana hoşgeldinize ulaşabilmek için grub parametrelerini editleyerek
> > /probe/usb=false dedim ve bu hatayı geçtim.
> >
> > Ardından da şu hata mesajını aldım:
> > Running 0dns-down to make sure resolv.conf is ok... done
> > Setting up networking... done
> > Starting hotplug subsystem
> > pci
> > <6>Linux agpgart interface v0.100 (c) Dave Jones
> >
> > burada durdu kaldı.
> >
> > Bu listede aynı laptopun pil durumu ile ilgili bir tartışma gördüm.
> > Milli Eğt. Bak. toshiba laptop için bir sarge kurulum belgesi
> > hazırlayan ya da buradan yardım etmek isteyen varsa bilsin ki yardım
> > bekleyen bisürü insan var debian dünyasına dalmak isteyen. Yardımlar
> > için,
> >
> > Şimdiden teşekkürler..
> >
>
Reply to: