MPlayer Sorunu
Merhaba,
Yardım eden herkese teşekkür ederim. (Özellikle Serdar Aytekin ve Emre
Kadıoğlu)
apt-get ile mplayer-k7, mplayer-fonts, w32codecs'i fln kurdm.... Birşeyi
oynatmaya kalktığımda şunlar oluyor...
------------------------------
tunix@tunix:/mnt/tunix/filmler/Klipler$ mplayer Stacie\ Orrico\ -\ Stuck.mpg
MPlayer 1.0pre6-3.3.4 (C) 2000-2004 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Clawhammer (Family: 8, Stepping: 8)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE supported but disabled
SSE2 supported but disabled
3DNow supported but disabled
3DNowExt supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX
Failed to open /dev/rtc: Erişim engellendi (it should be readable by the
user.)
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : Erişim engellendi
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: Böyle bir dosya ya da dizin yok
Failed to open LIRC support.
You will not be able to use your remote control.
Playing Stacie Orrico - Stuck.mpg.
MPEG-PS file format detected.
VIDEO: MPEG1 352x240 (aspect 12) 29.970 fps 1600.0 kbps (200.0 kbyte/s)
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [libmad] libmad mpeg audio decoder
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 28000->176400 (224.0 kbit)
Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3)
==========================================================================
vo: X11 running at 1280x800 with depth 24 and 32 bpp (":0.0" => local
display)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: default
------------------------------
Burada kalıyor... Videoyu oynatmıyor. CTRL-C'ye bastığımda aşağıdakileri
yazıp çıkıyor.
MPlayer interrupted by signal 2 in module: enable_cache
MPlayer interrupted by signal 2 in module: ao2_init
------------------------------
Sorun ne olabilir ? Anladığım kadarıyla ses sistemiyle alakalı bir
problemim var.
--
Alper KANAT
http://raptiye.org
Reply to: