Re: realtek RTL810xE PCI Express Fast Ethernet y kernel 5.2
On Thursday, August 29, 2019 9:27:18 AM -03 Gonzalo Rivero wrote:
> Buen día,
> hace unos días actualicé mi debian testing y me di con que mi placa de
> red no funciona... y probablemente hace mucho no funciona porque venía
> manejándome exclusivamente por wifi
> según lspci -v -k:
> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI
> Express Fast Ethernet controller (rev 05) Subsystem: Realtek Semiconductor
> Co., Ltd. RTL810xE PCI Express Fast Ethernet controller Flags: fast devsel,
> IRQ 17
> I/O ports at d000 [size=256]
> Memory at d0604000 (64-bit, prefetchable) [size=4K]
> Memory at d0600000 (64-bit, prefetchable) [size=16K]
> Capabilities: [40] Power Management version 3
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> Capabilities: [70] Express Endpoint, MSI 01
> Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
> Capabilities: [d0] Vital Product Data
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [140] Virtual Channel
> Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
> Kernel modules: r8169
>
> según lsmod tengo cargado el módulo:
> lsmod |grep 8169
> r8169 98304 0
> libphy 94208 2 r8169,realtek
>
> pero ifconfig -a no aparece nada cableado:
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> inet 127.0.0.1 netmask 255.0.0.0
> inet6 ::1 prefixlen 128 scopeid 0x10<host>
> loop txqueuelen 1000 (Local Loopback)
> RX packets 253 bytes 36319 (35.4 KiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 253 bytes 36319 (35.4 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
> inet 10.0.219.22 netmask 255.255.255.255 destination 10.0.219.21
> inet6 fe80::5ca3:a319:866d:ed6e prefixlen 64 scopeid 0x20<link>
> unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen
> 100 (UNSPEC) RX packets 16269 bytes 6831208 (6.5 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 13743 bytes 836991 (817.3 KiB)
> TX errors 0 dropped 4 overruns 0 carrier 0 collisions 0
>
> wlp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 172.21.234.143 netmask 255.255.0.0 broadcast 172.21.255.255
> inet6 fe80::1acf:5eff:fe6a:ac3c prefixlen 64 scopeid 0x20<link>
> ether 18:cf:5e:6a:ac:3c txqueuelen 1000 (Ethernet)
> RX packets 106881 bytes 73644461 (70.2 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 85649 bytes 14929711 (14.2 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> no se que se me está pasando por alto o que estoy haciendo mal al buscar
> ayuda en google?
Buenas
es muy posible que te falte el firmware
chequea el dmesg para ver si encontras algo referente a eso.
muy posiblemente este en el paquete firmware-realtek
saludos
Matias
Reply to: