Re: Debian 9 no monta dispositivo mp3
El lun, 04-01-2016 a las 15:06 -0500, listascorreo@msjs.co escribió:
> Hola lista...
>
> ¿Enguayabados?...
>
> Estoy tratando de montar un mp3 en D9 y no se ha podido.
> Datos:
>
> sudo apt-get install gvfs-backends mtpfs jmtpfs libmtp-common mtp-
> tools
> libmtp-dev libmtp-runtime libmtp9
>
> mtp-detect
> libmtp version: 1.1.10
>
> Listing raw device(s)
> Device 0 (VID=0781 and PID=74e4) is a SanDisk Sansa Clip Zip.
> Found 1 device(s):
> SanDisk: Sansa Clip Zip (0781:74e4) @ bus 8, dev 5
> Attempting to connect device(s)
> PTP_ERROR_IO: failed to open session, trying again after resetting
> USB
> interface
> LIBMTP libusb: Attempt to reset device
> LIBMTP PANIC: failed to open session on second attempt
> Unable to open raw device 0
> OK.
>
>
> lsusb
> Bus 008 Device 005: ID 0781:74e4 SanDisk Corp.
>
> cat /etc/udev/rules.d/69-libmtp.rules
> cat /etc/udev/rules.d/69-libmtp.rules
> # SanDisk Sansa Clip Zip\nATTR{idVendor}=="0781",
> ATTR{idProduct}=="74e4", SYMLINK+="libmtp-%k", MODE="660",
> GROUP="audio", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
>
>
> cat /etc/udev/rules.d/51-android.rules
> SUBSYSTEM=="usb", ATTR{idVendor}=="0781", ATTR{idProduct}=="74e4",
> MODE="0666"
>
> cat /etc/fuse.conf
> # Set the maximum number of FUSE mounts allowed to non-root users.
> # The default is 1000.
> #mount_max = 1000
> # Allow non-root users to specify the allow_other or allow_root
> mount
> options.
> user_allow_other
>
>
> mtpfs -o allow_other /media/tableta
> Listing raw device(s)
> Device 0 (VID=0781 and PID=74e4) is a SanDisk Sansa Clip Zip.
> Found 1 device(s):
> SanDisk: Sansa Clip Zip (0781:74e4) @ bus 6, dev 5
> Attempting to connect device
> PTP_ERROR_IO: failed to open session, trying again after resetting
> USB
> interface
> LIBMTP libusb: Attempt to reset device
> LIBMTP PANIC: failed to open session on second attempt
> Unable to open raw device 0
>
> fdisk -l no muestra el dispositivo.
>
> ¿Alguna idea?
>
> Saludos,
>
a mi los mp3 siempre me funcionaron como dispositivos de
almacenamiento, te diría: probá conectarlo en otro usb (los de atrás
suelen andar mejor), pero antes de conectarlo:
tail -f /var/log/messages
y fijate que aparece por pantalla
Reply to: