Re: Ayuda disco duro caido con mis datos...
2013/8/16 Maykel Franco <maykeldebian@gmail.com>:
> El día 16 de agosto de 2013 15:48, Ricardo <ricardoeureka@gmail.com> escribió:
>> El 16/08/13 10:33, Maykel Franco escribió:
>>
>>> Hola muy buenas, se me ha caído un disco duro externo 3.0 usb al
>>> suelo, la altura no era muy grande pero muchas veces depende de la
>>> posición como caiga...
>>>
>>> El caso es que al conectar al debian mediante usb me reporta esto:
>>>
>>> [13192.225131] scsi 12:0:0:0: Device offlined - not ready after error
>>> recovery
>>> [13192.226541] usb 4-1: Set SEL for device-initiated U1 failed.
>>> [13192.226569] usb 4-1: Set SEL for device-initiated U2 failed.
>>> [13192.432828] usb 4-1: new SuperSpeed USB device number 4 using xhci_hcd
>>> [13192.446405] usb 4-1: New USB device found, idVendor=0480,
>>> idProduct=d010
>>> [13192.446416] usb 4-1: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=3
>>> [13192.446423] usb 4-1: Product: External USB 3.0
>>> [13192.446428] usb 4-1: Manufacturer: Toshiba
>>> [13192.446432] usb 4-1: SerialNumber: 20130123001617
>>> [13192.450679] scsi13 : usb-storage 4-1:1.0
>>> [13207.040930] usb 4-1: USB disconnect, device number 4
>>> [13214.051048] scsi 13:0:0:0: Device offlined - not ready after error
>>> recovery
>>> [13214.052579] usb 4-1: Set SEL for device-initiated U1 failed.
>>> [13214.052595] usb 4-1: Set SEL for device-initiated U2 failed.
>>> [13214.258631] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd
>>> [13214.272188] usb 4-1: New USB device found, idVendor=0480,
>>> idProduct=d010
>>> [13214.272192] usb 4-1: New USB device strings: Mfr=1, Product=2,
>>> SerialNumber=3
>>> [13214.272195] usb 4-1: Product: External USB 3.0
>>> [13214.272196] usb 4-1: Manufacturer: Toshiba
>>> [13214.272198] usb 4-1: SerialNumber: 20130123001617
>>> [13214.275294] scsi14 : usb-storage 4-1:1.0
>>> [13236.142817] usb 4-1: reset SuperSpeed USB device number 5 using
>>> xhci_hcd
>>> [13236.155103] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
>>> with disabled ep ffff880071aaed40
>>> [13236.155117] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
>>> with disabled ep ffff880071aaed80
>>>
>>> El disco duro es un:
>>>
>>> Bus 004 Device 008: ID 0480:d010 Toshiba America Info. Systems, Inc.
>>>
>>> Hay alguna manera de sacar mis valiosos datos de ahí..Quizá
>>> desmontándolo...No sé ha sido bastante mala suerte la caida del disco
>>> duro...
>>>
>>> Gracias.
>>>
>>> Saludos.
>>>
>>>
>> Envia la salida de
>> # lsusb
>> # fdisk -l
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact
>> listmaster@lists.debian.org
>> Archive: [🔎] 520E2D9A.5040402@gmail.com">http://lists.debian.org/[🔎] 520E2D9A.5040402@gmail.com
>>
>
>
> Es lo que he enviado, fdisk -l no saca el disco usb y lsusb:
>
> # lsusb
> Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 003 Device 002: ID 04f3:0212 Elan Microelectronics Corp. Laser Mouse
> Bus 004 Device 012: ID 0480:d010 Toshiba America Info. Systems, Inc.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 003: ID 04f2:b369 Chicony Electronics Co., Ltd
>
> Gracias.
>
> Saludos.
Estoy mirando en foros...Esta es la salida de dmesg | grep -i xhci por si ayuda:
[13085.569765] usb 3-3: reset high-speed USB device number 7 using xhci_hcd
[13085.603909] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800c3d376c0
[13085.603923] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800c3d37700
[13139.675917] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[13162.247187] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd
[13162.259485] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880071aaed40
[13162.259499] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880071aaed80
[13192.432828] usb 4-1: new SuperSpeed USB device number 4 using xhci_hcd
[13214.258631] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd
[13236.142817] usb 4-1: reset SuperSpeed USB device number 5 using xhci_hcd
[13236.155103] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880071aaed40
[13236.155117] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880071aaed80
[13266.329490] usb 4-1: new SuperSpeed USB device number 6 using xhci_hcd
[13288.217371] usb 4-1: new SuperSpeed USB device number 7 using xhci_hcd
[13310.015340] usb 4-1: new SuperSpeed USB device number 8 using xhci_hcd
[13332.028309] usb 4-1: reset SuperSpeed USB device number 8 using xhci_hcd
[13332.040661] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880071b708c0
[13332.040675] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880071b70900
[13362.215856] usb 4-1: new SuperSpeed USB device number 9 using xhci_hcd
[13384.104773] usb 4-1: new SuperSpeed USB device number 10 using xhci_hcd
[13405.923999] usb 4-1: reset SuperSpeed USB device number 10 using xhci_hcd
[13405.936285] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88008818cac0
[13405.936290] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88008818cb00
[13436.110639] usb 4-1: new SuperSpeed USB device number 11 using xhci_hcd
[13457.999495] usb 4-1: new SuperSpeed USB device number 12 using xhci_hcd
Saludos.
Reply to: