Ayuda con Wifi USB
Hola,
Tengo Debian Wheezy 64 bits y no consigo conectar a mi red wifi con un
dispositivo USB. Me detecta las redes pero cuando intento conectar con
WPA2 me dice que hay un error al autentificar. He comprobado la
contraseña mil veces y está bien, desde windows conecto con el mismo
dispositivo de red, he probado con el driver nativo y con ndiswrapper,
poniendo la contraseña en passfrase y en HEX. Se me han acabado las
ideas. Os dejo la salida del comando dmesg por si os sirve:
[ 3969.968024] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[ 3970.101326] usb 1-6: New USB device found, idVendor=0bda, idProduct=8176
[ 3970.101333] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3970.101337] usb 1-6: Product: \x08
[ 3970.101340] usb 1-6: Manufacturer: Re\xffffffc2\xffffff87\xffffff87\x08tek
[ 3970.101343] usb 1-6: SerialNumber: 00e04c000001
[ 3970.174825] rtl8192cu: MAC address: e8:4e:06:0c:da:9e
[ 3970.174834] rtl8192cu: Board Type 0
[ 3970.179566] usb 1-6: firmware: agent loaded rtlwifi/rtl8192cufw.bin
into memory
[ 3970.180079] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 3970.180250] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[ 3970.181341] cfg80211: Calling CRDA for country: US
[ 3970.188898] cfg80211: Regulatory domain changed to country: US
[ 3970.188903] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 3970.188909] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2700 mBm)
[ 3970.188914] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 1700 mBm)
[ 3970.188919] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3970.188924] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3970.188929] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3970.188935] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 3000 mBm)
[ 3970.228196] rtl8192cu: MAC auto ON okay!
[ 3970.260834] rtl8192cu: Tx queue select: 0x05
[ 3970.261585] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
[ 3970.653513] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3972.188208] wlan0: authenticate with 00:19:15:ba:91:11 (try 1)
[ 3972.190838] wlan0: authenticated
[ 3972.213206] wlan0: associate with 00:19:15:ba:91:11 (try 1)
[ 3972.220469] wlan0: RX AssocResp from 00:19:15:ba:91:11 (capab=0x411
status=0 aid=1)
[ 3972.220474] wlan0: associated
[ 3972.222043] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3982.226769] wlan0: disassociating from 00:19:15:ba:91:11 by local
choice (reason=3)
[ 3982.229327] wlan0: deauthenticating from 00:19:15:ba:91:11 by local
choice (reason=3)
[ 3982.229336] cfg80211: Calling CRDA to update world regulatory domain
[ 3982.236815] cfg80211: World regulatory domain updated:
[ 3982.236821] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 3982.236827] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3982.236832] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 3982.236837] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 3982.236842] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3982.236847] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3983.972728] wlan0: authenticate with 00:19:15:ba:91:11 (try 1)
[ 3983.974604] wlan0: authenticated
[ 3983.974833] wlan0: associate with 00:19:15:ba:91:11 (try 1)
[ 3983.977345] wlan0: RX ReassocResp from 00:19:15:ba:91:11
(capab=0x411 status=0 aid=1)
[ 3983.977350] wlan0: associated
[ 3993.984108] wlan0: disassociating from 00:19:15:ba:91:11 by local
choice (reason=3)
[ 3993.988212] cfg80211: Calling CRDA to update world regulatory domain
[ 3993.989696] wlan0: deauthenticating from 00:19:15:ba:91:11 by local
choice (reason=3)
[ 3993.996328] cfg80211: World regulatory domain updated:
[ 3993.996334] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 3993.996340] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3993.996345] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 3993.996350] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 3993.996356] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3993.996361] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3995.732405] wlan0: authenticate with 00:19:15:ba:91:11 (try 1)
[ 3995.735984] wlan0: authenticated
[ 3995.736222] wlan0: associate with 00:19:15:ba:91:11 (try 1)
[ 3995.738597] wlan0: RX ReassocResp from 00:19:15:ba:91:11
(capab=0x411 status=0 aid=1)
[ 3995.738602] wlan0: associated
[ 3996.732589] wlan0: deauthenticating from 00:19:15:ba:91:11 by local
choice (reason=3)
[ 3996.756593] cfg80211: Calling CRDA to update world regulatory domain
[ 3996.766757] cfg80211: World regulatory domain updated:
[ 3996.766761] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 3996.766765] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3996.766768] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 3996.766771] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 3996.766774] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 3996.766777] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
Un saludo!
Reply to: