Tengo unos modem serie multitech Modelo MT5656ZDX que soportan Caller Id,
al menos en Windows lo hacen, que es de suponer qe tabi'en lo soporte
Linux.
Tengo activado el identificador de llamada con con ETECSA.
Adjunto tengo un ejemplo de mi configuracion de freeradius que funciona
perfectamente pero para el identificador de llamada no funciona, me
refiero al Calling-Station-Id y Called-Station-Id
He probado con freeradius 1.3 y con freeradius 2.x.x
Esto es lo que me responde el freeradius -X
rad_recv: Accounting-Request packet from host 192.168.1.1:44174, id=135,
length=134
Acct-Session-Id = "5044E40B3DCE00"
User-Name = "pepe"
Acct-Status-Type = Stop
Service-Type = Framed-User
Framed-Protocol = PPP
Acct-Authentic = RADIUS
Acct-Session-Time = 1098
Acct-Output-Octets = 2983729
Acct-Input-Octets = 867335
Acct-Output-Packets = 7451
Acct-Input-Packets = 7174
NAS-Port-Type = Async
Acct-Terminate-Cause = Lost-Carrier
Framed-IP-Address = 192.168.1.250
NAS-IP-Address = 192.168.1.1
NAS-Port = 0
Acct-Delay-Time = 0
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 0
modcall[preacct]: module "preprocess" returns noop for request 0
rlm_acct_unique: Hashing 'NAS-Port = 0,Client-IP-Address =
192.168.1.1,NAS-IP-Address = 192.168.1.1,Acct-Session-Id =
"5044E40B3DCE00",User-Name = "pepe"'
rlm_acct_unique: Acct-Unique-Session-ID = "843ee11a1da88ed0".
modcall[preacct]: module "acct_unique" returns ok for request 0
rlm_realm: No '@' in User-Name = "pepe", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[preacct]: module "suffix" returns noop for request 0
modcall[preacct]: module "files" returns noop for request 0
modcall: leaving group preacct (returns ok) for request 0
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 0
radius_xlat: '/var/log/freeradius/radacct/192.168.1.1/detail-20120903'
rlm_detail: /var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d
expands to /var/log/freeradius/radacct/192.168.1.1/detail-20120903
modcall[accounting]: module "detail" returns ok for request 0
modcall[accounting]: module "unix" returns ok for request 0
radius_xlat: '/var/log/freeradius/radutmp'
radius_xlat: 'pepe'
modcall[accounting]: module "radutmp" returns ok for request 0
modcall: leaving group accounting (returns ok) for request 0
Sending Accounting-Response of id 135 to 192.168.1.1 port 44174
Finished request 0
Going to the next request
Al parecer no tiene activado el Calling-Station-Id
Como puedo resolver este problema???
Salu2
Cosme
Attachment:
freeradius.tar.gz
Description: GNU Zip compressed data