[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Problema con la red despues actualizar debian testing



Buenas Tardes Lista,

Ayer actualice mi debian testing y este hoy no tiene red, ya di varias vueltas googleando en la red, sin encontrar nada que me sirva, revise el /etc/network/interfaces y esta bien, realice un ifconfig pero no aparece con direccion IP de la tarjeta que es eth0, levante la tarjeta con ifup eth0, ademas asigne via consola la direccion IP, gateway y DNS, si bien aparece ahora al realizar ifconfig y puedo hacer ping al localhost todavia no logra conectarse a la red, alguien le paso algo similar?

root@SDF1:/# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
    address x.x.x.x
    netmask x.x.x.x
    network x.x.x.x
    broadcast x.x.x.x
    gateway x.x.x.x
    # dns-* options are implemented by the resolvconf package, if installed
    nameservers x.x.x.x

root@SDF1:/# ifconfig
eth0      Link encap:Ethernet  HWaddr aa:00:04:00:0a:04
            inet addr:x.x.x.x   Bcast:x.x.x.x Mask:x.x.x.x
            UP BROADCAST MULTICAST  MTU:1500  Metric:1
            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
            TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000
            RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
            Interrupt:16

lo         Link encap:Local Loopback 
           inet addr:127.0.0.1  Mask:255.0.0.0
           inet6 addr: ::1/128 Scope:Host
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:432 errors:0 dropped:0 overruns:0 frame:0
           TX packets:432 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:30928 (30.2 KiB)  TX bytes:30928 (30.2 KiB)


-
Joram

Reply to: