Problema con Scanner BENQ-4300
Saludos a todos:
Estoy tratando de utilizar este scanner (en lenny) y no lo he logrado,
he seguido varios tutoriales en internet y nada, aca les pongo los
resultados de...
# sane-find-scanner
<...>
found USB scanner (vendor=0x04a5, product=0x20b0) at libusb:001:007
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
<...>
# lsusb
Bus 005 Device 006: ID 152d:2338 JMicron Technology Corp. / JMicron USA
Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 /
Trust 450L Optical Mouse
Bus 002 Device 003: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 04a5:20b0 Acer Peripherals Inc. (now BenQ Corp.)
S2W 3300U/4300U
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Asi como la parte del snapscan.conf que interesa
#------------------------------ General -----------------------------------
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /usr/share/sane/snapscan/u222v067.bin
# If not automatically found you may manually specify a device name.
# For USB scanners also specify bus=usb, e.g.
/dev/usb/scanner0 bus=usb
Ademas he agregado mi usuario a todos los grupos que tinen alguna
relacion con xsane(lp, scanner, saned), no se si sera informacion
suficiente par que puedan ayudarme...
Gracias de antemano
Roberto Ibarra (Bob)
Reply to: