[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Destination Host Unreachable al cambiar IP estática



El día 22 de septiembre de 2009 10:28, Jarley dg <jarley73@gmail.com> escribió:
> Hola lista:
>
> Hoy luego de cambiar la ip estática de mi Debian Lenny 5.0.3 a otra,
> no logro volver a establecer conexión con el mundo exterior -_-" ....
>
> Que he intentado y no funciona :
>
> - Revisado los archivos de configuración 847539857394375934 veces y
> asumo que están bien.
> - Poner la ip estática anterior  y nada.
> - Poner el cable de red del servidor el solito directo a un switch,
> también a un hub y luego al router y también del server al router
> directamente y nada
> - No tengo iptables ni ningún firewall
> - Ping al router - Destination Host Unreachable
> - Ping a otro ordenador con IP estática en la misma red , Destination
> Host Unreachable
> - Cables probados, tarjetas de red probadas con lspci que están
> funcionando, quito y pongo el cable de red y obtengo mensaje en
> consola de connect y desconnect.
>
> Lo que funciona :
>
> Ping al nombre de mi server, funciona (DNS Ok)
> Ping a las 3 tarjetas de red que tiene dicho server, funciona
> Ping desde otro ordenador con windows y con IP estática en la misma
> red a mi servidor, responde el ping pero con fallos
> aleatorios. 3 recibidos 1 fallo, 4 fallos 1 recibidos, etc...
> Poner la IP de este linux en otro servidor Windows, funciona, navega y
> ve el router.
>
> Archivos de configuración :
>
> cat /etc/resolv.conf
> domain midominio.es
> nameserver 127.0.0.1
> nameserver 192.168.203.200
> nameserver ip.de.mi.servidor
> nameserver 212.89.0.31  <--- dns telecable
>
> ----------------------------------------------------------------
> cat /etc/network/interfaces
> # The loopback network interface
> auto lo
> iface lo inet loopback
> address 127.0.0.1
> netmask 255.0.0.0
> #-----------------------------------------------------
> #iNet1 Telecable
> auto eth1
> iface eth1 inet static
>        address 14.15.16.17
>        netmask 255.255.255.128
>        gateway 14.15.16.1
>        dns-nameservers 212.89.0.31
> #-----------------------------------------------------
> #LAN network
> auto eth2
> iface eth2 inet static
>        address 192.168.203.200
>        netmask 255.255.255.0
>        gateway 192.168.203.200
>        dns-nameservers 192.168.203.200
> #------------------------------------------------------
> #iNet3  Telecable
> auto eth3
> iface eth3 inet static
>        address 14.15.16.18
>        netmask 255.255.255.128
>        gateway 14.15.16.1
>        dns-nameservers 212.89.0.31
> ----------------------------------------------------------
> :~/scripts# ifconfig
> eth1      Link encap:Ethernet  HWaddr XXXXXXXXXX
>          inet addr:14.15.16.17  Bcast:XXXXXXX  Mask:255.255.255.128
>          inet6 addr: xxxxxxxxxxxxxxxxxxxx/64 Scope:Link
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:18047 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:3355 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:1394514 (1.3 MiB)  TX bytes:177980 (173.8 KiB)
>
> eth2      Link encap:Ethernet  HWaddr 00:04:23:88:b8:b5
>          inet addr:192.168.203.200  Bcast:192.168.203.255  Mask:255.255.255.0
>          inet6 addr: fe80::204:23ff:fe88:b8b5/64 Scope:Link
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:24911 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:15082 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:5565249 (5.3 MiB)  TX bytes:12895177 (12.2 MiB)
>
> eth3      Link encap:Ethernet  HWaddr xxxxxxxxxxxxxxxxx
>          inet addr:14.15.16.18  Bcast:XXXXXXXXX  Mask:255.255.255.128
>          inet6 addr: xxxxxxxxxxxxxxxxx/64 Scope:Link
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>          RX packets:22744 errors:0 dropped:0 overruns:1 frame:0
>          TX packets:4353 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:2695945 (2.5 MiB)  TX bytes:296180 (289.2 KiB)
>          Interrupt:21 Base address:0x2000
>
> lo        Link encap:Local Loopback
>          inet addr:127.0.0.1  Mask:255.0.0.0
>          inet6 addr: ::1/128 Scope:Host
>          UP LOOPBACK RUNNING  MTU:16436  Metric:1
>          RX packets:11508 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:11508 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:0
>          RX bytes:3474567 (3.3 MiB)  TX bytes:3474567 (3.3 MiB)
>
> -----------------------------------------
> :~/scripts# route
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> 14.15.16.17     *               255.255.255.128 U     0      0        0 eth3
> 14.15.16.18     *               255.255.255.128 U     0      0        0 eth1
> 192.168.203.0   *               255.255.255.0   U     0      0        0 eth2
>
> entonces hago :
>
> route add default gw 14.15.16.1 dev eth1
>
> :~/scripts# route
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
> 14.15.16.17     *               255.255.255.128 U     0      0        0 eth3
> 14.15.16.18     *               255.255.255.128 U     0      0        0 eth1
> 192.168.203.0   *               255.255.255.0   U     0      0        0 eth2
> default         14.15.16.1   0.0.0.0         UG    0      0        0 eth1
>
> :~/scripts# ping 14.15.16.1
> PING 14.15.16.1 (14.15.16.1) 56(84) bytes of data.
> >From 14.15.16.18 icmp_seq=10 Destination Host Unreachable
> >From 14.15.16.18 icmp_seq=11 Destination Host Unreachable
> >From 14.15.16.18 icmp_seq=12 Destination Host Unreachable
> ^C
> --- 14.15.16.1 ping statistics ---
> 13 packets transmitted, 0 received, +3 errors, 100% packet loss, time 12013ms
> , pipe 3
>
> :~/scripts# ping www.google.es
> ping: unknown host www.google.es
>
> --------------------------------------------------------------------------
> Sinceramente o estoy muy saturado y es una tonteria como siempre
> o tengo estudiar mas pq no veo por ningún lado que falla o que me
> falta por cambiar...
>
> Gracias por adelantado por la ayuda.
>
> salu2  JDG
>
>
> --
> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>

Probaste la placa de red?

-- 
MrIX
Linux user number 412793.
http://counter.li.org/

las grandes obras,
las sueñan los santos locos,
las realizan los luchadores natos,
las aprovechan los felices cuerdo,
y las critican los inútiles crónicos,

yo no fui, seguro que es mas inteligente.


Reply to: