2008/7/1 Elvis Aaron Presley <elvisa@terra.es>:
Hola listeros, tengo un debian sarge sin entorno gráfico al que al pinchar
un disco duro usb no soy capaz de acceder a dicho disco duro. Este usb está
formateado en fat32. Conozco perfectamente el comando mount que tengo que
hacer para montarlo... El problema es que no se en que /dev está!!!! No se
si es /dev/sda1 o /dev/usb/ez0 o donde mirar esto... ¿algún comandito mágico
que me pueda alumbrar?
Gracias.
Elvis
--
Estimado Elvis:
Justo después de conectar tu dispositivo USB, escribe lo siguiente:
dmesg
y te saldrá algo similar a esto:
[ 2356.238274] usb 1-9: new high speed USB device using ehci_hcd and address 6
[ 2356.299239] usb 1-9: configuration #1 chosen from 1 choice
[ 2356.299460] scsi9 : SCSI emulation for USB Mass Storage devices
[ 2356.299462] usb-storage: device found at 6
[ 2356.299466] usb-storage: waiting for device to settle before scanning
[ 2358.569169] usb-storage: device scan complete
[ 2358.569433] scsi 9:0:0:0: Direct-Access Kingston DataTraveler
2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 2358.804375] sd 9:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 2358.804656] sd 9:0:0:0: [sdb] Write Protect is off
[ 2358.804659] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2358.804661] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2358.805937] sd 9:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 2358.806300] sd 9:0:0:0: [sdb] Write Protect is off
[ 2358.806303] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2358.806305] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2358.806309] sdb: sdb1
[ 2358.806715] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 2358.806751] sd 9:0:0:0: Attached scsi generic sg2 type 0
Entonces fácilmente puedes deducir que que dispositivo se trata
Saludos