Re: Instalar tarjeta de red
On Nov 17, 2007 1:55 PM, perico <perico_rota@telefonica.net> wrote:
> Manuel García escribió:
> > On Nov 16, 2007 2:46 PM, perico <perico_rota@telefonica.net> wrote:
> >
> >> Manuel García escribió:
> >>
> >>> On 10/24/07, perico <perico_rota@telefonica.net> wrote:
> >>>
> >>>
> >>>> He instalado Debian en un ordenador viejo con un pentium III 931mhz.
> >>>> con tarjeta de red 3com 3c509b etherlink III. Esta tarjeta está
> >>>> soportada por linux. Pero en la instalación, que ha sido correcta, no
> >>>> me la ha reconocido. He intentado montar la tarjeta con la
> >>>> herramienta "modconfi" pero este paquete no está instalado, ni tampoco
> >>>> está en el CD de instalación. Como puedo montar la tarjeta sin
> >>>> conexión a Internet.
> >>>> gracias
> >>>> perico
> >>>>
> >>>>
> >>>> --
> >>>> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
> >>>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >>>>
> >>>>
> >>>>
> >>>>
> >>> Lo primero que intentaria es utilizar el comando lspci como root para
> >>> ver que datos arroja el SO sobre la tarjeta, luego, con esa
> >>> información buscaria el modulo necesario en el kernel, y lo cargaria
> >>> con modprobe.
> >>> Basicamente, en una consola o terminal:
> >>>
> >>> 1.- su -
> >>> 2.- lspci -v | less
> >>> 3.- modprobe -l|grep nombre_modulo_posible
> >>> 4.- modprobe modulo
> >>>
> >>> Si no arroja error...
> >>>
> >>> 5.- nano (o vi según tu gusto) /etc/network/interfaces (para
> >>> asegurarnos que haya una definición para la tarjeta)
> >>> 6.- ifup ethX (donde la X se sustituye por el número de la tarjeta, si
> >>> es la única o la principal X=0)
> >>>
> >>> Game Over.
> >>>
> >>>
> >>>
> >> Retomando el tema: Os pego el resultado de
> >> lspci -v | less
> >> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
> >> PRO133x] (rev c4)
> >> Subsystem: Elitegroup Computer Systems: Unknown device 0969
> >> Flags: bus master, medium devsel, latency 16
> >> Memory at d0000000 (32-bit, prefetchable) [size=64M]
> >> Capabilities: [a0] AGP version 2.0
> >> Capabilities: [c0] Power Management version 2
> >>
> >> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
> >> MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
> >> Flags: bus master, 66MHz, medium devsel, latency 0
> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> >> Memory behind bridge: d4000000-d5ffffff
> >> Prefetchable memory behind bridge: d6000000-d7ffffff
> >> Capabilities: [80] Power Management version 2
> >>
> >> 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile
> >> South] (rev 23)
> >> Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge
> >> Flags: bus master, stepping, medium devsel, latency 0
> >>
> >> 0000:00:07.1 IDE interface: VIA Technologies, Inc.
> >> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
> >> (prog-if 8a [Master SecP PriP])
> >> Flags: bus master, medium devsel, latency 32
> >> I/O ports at e000 [size=16]
> >> Capabilities: [c0] Power Management version 2
> >>
> >> 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
> >> 1.1 Controller (rev 11) (prog-if 00 [UHCI])
> >> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> >> Flags: bus master, medium devsel, latency 32, IRQ 10
> >> I/O ports at e400 [size=32]
> >> Capabilities: [80] Power Management version 2
> >>
> >> 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power
> >> Management (rev 30)
> >> Flags: medium devsel
> >>
> >> 0000:00:0b.0 Communication controller: Conexant HCF 56k Data/Fax/Voice
> >> Modem (rev 08)
> >> Subsystem: CIS Technology Inc: Unknown device 1134
> >> Flags: bus master, medium devsel, latency 32, IRQ 9
> >> Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
> >> I/O ports at e800 [size=8]
> >>
> >>
> >> 0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
> >> Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
> >> Flags: bus master, slow devsel, latency 32, IRQ 10
> >> I/O ports at ec00 [size=64]
> >> Capabilities: [dc] Power Management version 1
> >>
> >> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA
> >> TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
> >> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
> >> Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
> >> Memory at d6000000 (32-bit, prefetchable) [size=32M]
> >> Capabilities: [60] Power Management version 1
> >> Capabilities: [44] AGP version 2.0
> >> Yo no veo mi tarjeta.
> >> gracias
> >>
> >>
> >>
> >
> > lspci -v|grep Ethernet
> >
> >
> Cuando ejecuto;
>
> lspci -v|grep Ethernet
>
> No me devuelve ninguna información.
> Gracias.
>
Entonces el problema es más grave, o no funciona el PCI del MoBo o no
funciona la terjeta, probaste cambiandola de puerto PCI a ver? o es
integrada?
--
Manuel Garcia
Administrador de redes y servidores
Corporacion Lynqus
Debian GNU/Linux 4.1
codename "Lenny"
Reply to: