[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: i810 y aceleracion gráfica

On Monday 12 June 2006 11:57, Pedro M. López wrote:
> El Lunes, 12 de Junio de 2006 12:26, Enrique Jiménez Campos escribió:
> > On Friday 09 June 2006 13:30, Pedro M. López wrote:
> > > El Viernes, 9 de Junio de 2006 13:10, ChEnChO escribió:
> > > > 2006/6/10, Enrique Jiménez Campos <ejcampos@gmail.com>:
> > > > > Estoy bastante molesto al no poder usar la potencia de mi portatil
> > > > > al 100%, resulta que tengo la tarjeta grafica integrada en placa (
> > > > > Intel 82852/855GM Integrated Graphics 64 mb )
> >
> > He quitado el contenido de los ficheros para que sea mas comodo el post
> >
> > > > de todas maneras, xorg 7.0 se lleva fatal con el DRI y la
> > > > aceleración.
> > >
> > > Sería mucho más útil si nos incluyeras la salida del glxinfo.
> > >
> > > Yo he tenido que pasarme a las Mesa 6.5.1 + kernel 2.6.17-rcX para
> > > poder utilizar la aceleración gráfica con Xorg, pero es por mi tarjeta
> > > gráfica, una r300.
> >
> >  La salida glxinfo :
> >  $ glxinfo
> >
> >
> > name of display: :0.0
> > display: :0  screen: 0
> > direct rendering: No
> > server glx vendor string: SGI
> > server glx version string: 1.2
>
> Vale, con esto ya sabemos que no tienes aceleración GL.
> Las causas pueden ser:
> 1º Problemas a la hora de cargar los módulos del kernel - el i915 y demás.
> Envía la salida del dmesg.
> 2º Problemas en las X.
> Envía el /var/log/Xorg.log
> Y entonces sabremos que parte tenemos que mirar más.
>
> Siento que esto sea tan lento, pero hay un montón de posibles causas para
> este problema, y creo que lo mejor es que vayamos eliminando las posibles
> causas...

la salida del mesg es kilometrica asi que solo pongo lo que e visto 
relacionado con la tarjeta grafica :


vesafb: framebuffer at 0xe8000000, mapped to 0xe0080000, using 937k, total 
8000k
vesafb: mode is 800x600x8, linelength=800, pages=16
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device



y este es el Xorg.0.log  ( las lineas finales ):

(II) I810(0): Rotating to 0 degrees
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 8000 kB
(II) I810(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip 
Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics 
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(--) I810(0): Xv is disabled because it needs 2D accel and AGPGART.
(II) I810(0): Allocating at least 512 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 6144 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0x7fff000 (0x1db21000)
(II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0x7ffb000 (0x14138000)
(II) I810(0): 0x820b1e0: Memory at offset 0x00000000, size 6144 kBytes
(II) I810(0): 0x82104f8: Memory at offset 0x07fff000, size 4 kBytes
(II) I810(0): 0x8210568: Memory at offset 0x07ffb000, size 16 kBytes
(II) I810(0): 0x8210014: Memory at offset 0x00000000, size 0 kBytes
(II) I810(0): 0x820b220: Memory at offset 0x00000000, size 0 kBytes
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x007df000 (pgoffset 2015)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x07ffb000 (pgoffset 32763)
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x80000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 47 Mpixel/s
(II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 240 Mbyte/s, 0 
Mbyte/s
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(**) Option "dpms"
(**) I810(0): DPMS enabled
(II) I810(0): direct rendering: Disabled
(II) I810(0): libshadow is version 1.0.0, required 1.1.0 or greater for 
rotation.
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
error opening security policy file /etc/X11/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "es"
(**) Generic Keyboard: XkbLayout: "es"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Configured Mouse: Buttons: 11
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from 
list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from 
list!
AUDIT: Tue Jun 13 13:06:04 2006: 4234 X: client 20 rejected from local host
AUDIT: Tue Jun 13 13:06:07 2006: 4234 X: client 20 rejected from local host


supongo que sera problema del nucleo no ? habra q compilarlo pero resulta que 
es un nucleo precompilao que he instalado desde el repositorio oficial.
saludoss
Reply to: