[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

problemas con dhcpd.conf [SOLUCIONADO]



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Carlos M.S. wrote:

>> Hola gente, estoy configurando un servidor dhcp3 en Linux y tengo un
>> problema. Los clientes obtienen su ip, máscaras, dns y aparentemente el
>> router (gateway). Lo cierto es que los clientes no pueden salir de la
>> red. Si se configuran estáticamente sí que funciona, luego falla el
>> servidor dhcp.
>>
>> El fichero dhcp3.conf es:
>> ...
>> ddns-update-style            none;
>>
>> default-lease-time           600;
>> max-lease-time               7200;
>>
>> option broadcast-address     192.168.10.255;
>> option log-servers           192.168.10.100;
>> option routers               192.168.10.1;
>> option subnet-mask           255.255.255.0;
>> option domain-name-servers   192.168.10.1;
>> option nntp-server 	     192.168.10.1;
>> option domain-name           "syc.org";
>>
>> subnet 192.168.10.0 netmask 255.255.255.0 {
>>     range dynamic-bootp 192.168.10.130 192.168.10.160;
>>     use-host-decl-names      on;
>> ...
>> }
>>
>>
>> El cliente recibe todo lo que necesita (confirmado con ethereal) y al
>> hacer un ifconfig se obtiene ip, máscara, broadcast...
>>
>> eth0      Link encap:Ethernet  HWaddr 00:0C:76:24:48:C5
>>           inet addr:192.168.10.158  Bcast:192.168.10.255
Mask:255.255.255.0
>>           inet6 addr: fe80::20c:76ff:fe24:48c5/64 Scope:Link
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>           RX packets:676 errors:0 dropped:0 overruns:0 frame:0
>>           TX packets:554 errors:0 dropped:0 overruns:0 carrier:0
>>           collisions:0 txqueuelen:1000
>>           RX bytes:293650 (286.7 KiB)  TX bytes:50565 (49.3 KiB)
>>           Interrupt:19 Base address:0xd800
>>
>>
>> Al hacer route -n se obtiene (todo ok):
>> Kernel IP routing table
>> Destination     Gateway         Genmask         Flags Metric Ref    Use
>> Iface
>> 192.168.10.0    0.0.0.0         255.255.255.0   U     0      0
 0 eth0
>> 0.0.0.0         192.168.10.1    0.0.0.0         UG    0      0
 0 eth0
>>
>>
>> Sin embargo, al hacer un ping www.google.com... Nada. Traduce a Ip pero
>> no hay respuesta alguna. Con Ip estática todo va bien...
>>
>> ¿Se les ocurre algo? He mirado el manual y google y nada, parece que
>> todo está ok.
>> Carlos


Yo me lo guiso, yo me lo como. Perdón por estos dos correos...
Tenía configuradas ciertas reglas con iptables en el gateway...
De todas formas he arreglado el fichero, las opciones de la subred están
fuera y debería estar dentro de la propia definición...
Carlos


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQFEEzvU4KSw4/6JXLERAhAgAKCYdwhAS5OwVJAxa5/q23WCKB52GACcCMPG
Rat2gC4ZkmRaR3H04H4PIyg=
=w309
-----END PGP SIGNATURE-----



Reply to: